Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Transitional Advantage Two pull is a 3 inch (76 mm) center to center Verona Bronze cabinet pull that creates a consistent handle layout on doors and drawers. The 3 inch center to center spacing defines where mounting holes are drilled, which simplifies layout and repeat setups on multiple cabinet fronts. The pull is part of the Advantage Series, so it matches that collection for coordinated cabinet hardware runs. The steel material gives the pull a solid feel in hand, which matters when this handle is used repeatedly on busy kitchen or shop cabinets. The Verona Bronze finish defines the visible color and sheen, which helps align the pull with other bronze-toned hardware in the same room. The 9552-20VB-P part number identifies this exact combination of size, material, finish, and series when specifying or reordering.
The 3 inch (76 mm) center to center measurement on this pull guides drilling templates and jigs, which supports accurate placement when laying out rows of cabinet handles. The pull uses 8-32 x 1 inch screw size, which matches common cabinet door and drawer front thicknesses in many woodworking projects. The 1-1/4 inch projection from the cabinet face defines the standoff distance, which influences drill depth planning when working near panel edges or profiles. The 1-9/16 inch length or diameter measurement helps installers visualize overall handle span relative to narrow or small drawer fronts. The 3/8 inch base diameter determines the contact circle on the cabinet face, which matters when positioning the pull away from panel edges or detailing.
This 3 inch (76 mm) center to center steel pull works on doors and drawers designed for that mounting pattern, which is common in many cabinet layouts. The Advantage Series designation connects this pull to a broader Berenson collection, which supports consistent hardware selection across an entire kitchen or bank of shop cabinets. The Verona Bronze finish keeps appearance aligned where other Verona Bronze components are used, which simplifies finish coordination on face frames, doors, and drawer fronts. The 1-1/4 inch projection sets the hand clearance away from the cabinet face, which helps when gripping the pull on thicker fronts or when pulling heavier drawers. The 1/2 inch width creates a defined grip area, which can matter on tall pantry doors or wider fronts where hands approach from different angles throughout the day.
The specified 3 inch center to center spacing drives consistent hole placement, which is important when using drilling jigs or CNC programs for repetitive cabinet production. The 1-9/16 inch length or diameter measurement describes the overall size of the pull, which helps installers visualize proportion on narrow rails or smaller drawer fronts. The 3/8 inch base diameter determines the size of the contact point at the surface, which affects how the pull sits over any profiling, edging, or narrow stiles. The 8-32 x 1 inch screw size identifies the thread and length used with this pull, which supports hardware planning alongside standard cabinet construction practices. Together, these dimensions shape how the pull fits into the broader cabinet hardware layout and workflow.
The pull has a 3 inch (76 mm) center to center size, which sets the spacing between mounting holes for drilling layouts and hardware jigs.
The Berenson 9552-20VB-P pull is made from steel, which gives the handle a solid feel during regular cabinet door and drawer use.
This Advantage Series pull has a Verona Bronze finish, which sets the color tone so it coordinates with other Verona Bronze cabinet hardware.
The pull projects 1-1/4 inch from the cabinet face, which defines hand clearance and how far the handle extends into the room.
This cabinet pull uses 8-32 x 1 inch screw size, which matches a common mounting standard for many cabinet doors and drawer fronts.
The pull has a 3/8 inch base diameter and 1/2 inch width, which define the visible footprint and grip area on the cabinet surface.
The Berenson Transitional Advantage Two Series 3 inch (76 mm) center to center Verona Bronze pull combines a defined drilling pattern, steel construction, and coordinated Advantage Series styling, which helps align cabinet hardware choices across a project. With its 1-1/4 inch projection, 1-9/16 inch length or diameter, 1/2 inch width, and 3/8 inch base diameter, this pull offers clear dimensions for layout and visual planning. Using the 9552-20VB-P part number and Verona Bronze finish details supports straightforward selection for new installations or matching existing Advantage Series hardware.
Sold In: 1 Each
