Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Transitional Advantage Two pull gives cabinets and furniture a defined gripping point while matching a Verona Bronze finish across a run of doors and drawers. The pull belongs to the Advantage Series, so it stays visually consistent wherever that collection is used throughout a job.
The material is steel, so the pull provides a solid feel in the hand on frequently used cabinet fronts. A length of 5-3/8 inches gives extra bar to grab, which helps on wider or heavier fronts where a compact knob can feel undersized.
The 3-25/32 inch (96 mm) center to center drilling keeps hole spacing within common layout dimensions, so it works cleanly across banks of doors and drawer faces that share a repeatable pattern.
A projection of 1-1/4 inches and a 1/2 inch width give enough finger clearance behind the pull while staying trim on the face, which is useful when doors need to open past adjacent obstacles without a bulky handle profile.
This Berenson cabinet pull is drilled on a 3-3/4 inch (96 mm) center to center, so two mounting points land on that spacing when set out on the door or drawer face. That measurement works across many standard cabinet patterns where a consistent offset from the edge is desired.
The pull reaches 5-3/8 inches in overall length, which leaves visible bar length beyond the mounting points for grip. A 3/8 inch base diameter at each end concentrates the contact area at the screw locations, helping the pull sit cleanly against the face material.
With a 1-1/4 inch projection off the surface, the pull stands proud enough for fingers to wrap behind without needing deep door reveals, which is useful on frameless or flush-front work.
This pull belongs to the Decorative Hardware & Moldings Handles and Pulls category, so it suits jobs where visible hardware is part of the finished look on cabinets or furniture. The Transitional Advantage Two Series identity highlights its role in projects that sit between traditional and modern styling within the Berenson lineup.
The Verona Bronze finish ties into darker or warm-toned cabinet fronts, giving a continuous hardware color across all installed pulls. Because the center to center is 3-25/32 inches (96 mm), it works on doors or drawers planned around that metric spacing, which is useful when matching drilled patterns in shop-built fronts.
The 5-3/8 inch length lets one pull serve both smaller doors and wider drawers within the same project, so the hardware line stays consistent from base cabinets to uppers. Steel construction supports repeated contact in high-use areas, keeping the pull in place on fronts that are opened many times per day in kitchens, baths, or workrooms.
The 96 mm center to center drilling is a fixed reference that works with jigs or templates laid out on that spacing, helping each pull land level and aligned from front to front. That repeatability is important on long runs where misalignment shows over multiple doors.
The 1/2 inch width keeps the pull visually narrow, so multiple units installed in a row do not dominate narrow rail faces. A 3/8 inch base diameter focuses contact at the mounting points, which helps the pull seat flat against different door thicknesses.
The 1-1/4 inch projection establishes consistent stand-off depth from the cabinet surface, which means fingers experience the same clearance on every opening point. That consistency is useful when tying this pull into a broader hardware schedule that repeats the same projection in multiple rooms.
The combination of Verona Bronze finish, steel material, and Advantage Series naming provides clear spec language for drawings or cut sheets. That clarity helps communicate exactly which handle is intended on each cabinet elevation, reducing confusion when multiple hardware lines are specified.
The Berenson Transitional Advantage Two pull has a 3-25/32 inch (96 mm) center to center, so hole spacing follows that dimension for consistent cabinet drilling.
The 9553-20VB-P pull measures 5-3/8 inches in overall length, providing extra gripping surface beyond the mounting points on cabinet doors and drawers.
The Verona Bronze pull is made from steel, giving it a solid body suited to frequent use on active cabinet fronts.
This Berenson pull has a 1-1/4 inch projection, creating consistent finger clearance behind the handle on doors and drawers.
The pull has a Verona Bronze finish, giving cabinet runs a coordinated bronze hardware look across all installation points.
This cabinet pull is part of the Berenson Transitional Advantage Two Series Advantage Series, aligning it with related handles in the same family.
The Berenson Verona Bronze cabinet pull combines a 3-25/32 inch (96 mm) center to center with a 5-3/8 inch length, steel construction, and 1-1/4 inch projection, giving installers a repeatable hardware choice for cabinet doors and drawers.
Using this Transitional Advantage Two Series pull on projects through Wurth Baer Supply ties hardware style, finish, and drilling layout together across kitchens, baths, or shop-built casework.
Sold In: 1 Each
