Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Transitional Advantage Two pull is a steel cabinet handle from the Advantage Series that provides a Verona Bronze finish for projects needing a transitional style between traditional and contemporary fronts. The 5-1/16 inch (128 mm) center to center mounting dimension creates a consistent layout across cabinet doors and drawers where that drilling pattern is already planned or existing. Overall length of 7-3/8 inch gives a full hand grip area across wider drawer fronts, which helps when opening heavier drawers. Projection of 1-1/4 inch sets the handle out from the surface so fingers clear the cabinet face during use. Width of 1/2 inch offers a slim profile that still presents enough edge for a confident pull. Steel construction provides a solid feel in hand, supporting repeated daily operation in kitchen, bath, or shop cabinetry where metal strength is valued.
The 5-1/16 inch (128 mm) center to center dimension defines the hole spacing required for mounting this pull, guiding drilling or reuse of existing holes on cabinet fronts. An overall length of 7-3/8 inch indicates how much horizontal space the pull occupies, which helps position it clear of neighboring hardware or door edges. The base diameter of 3/8 inch shows the footprint at each contact point, which helps align the pull on narrow rails or stile faces. Projection of 1-1/4 inch sets the stand-off from the door or drawer surface, allowing planning around adjacent doors so handles do not interfere. The 1/2 inch width gives an idea of the visual band across the front, which can be matched with stile widths or trim details in the cabinet layout.
This Advantage Series cabinet pull with Verona Bronze finish works well on cabinet doors and drawers where a 5-1/16 inch (128 mm) center to center pattern is specified, keeping alignment consistent across a run. The 7-3/8 inch overall length suits medium to wide drawer fronts, giving enough span for two or three fingers to grip without crowding. Projection of 1-1/4 inch helps when cabinets have profiled fronts, because it provides offset so hands clear raised panels or edge details. Width of 1/2 inch complements cabinet faces that use narrower rails or modern shaker fronts, as the slimmer line does not overpower the face frame. The steel material makes this pull appropriate for cabinets that see frequent opening cycles, such as kitchens, workrooms, or storage areas, where metal pulls are preferred for everyday handling.
The defined 5-1/16 inch (128 mm) center to center measurement supports repeatable drilling from one cabinet front to the next, which helps maintain even sight lines along a bank of doors. The 3/8 inch base diameter relates directly to the contact points on the surface, so installers can align the bases within stile or rail boundaries without conflicting with edge profiles. Projection of 1-1/4 inch balances ergonomics and clearance, giving fingers room behind the pull while keeping the handle close enough to the cabinet to limit snagging on clothing in narrow walkways. The 7-3/8 inch length provides predictable edge distances from the mounting holes to each end, which aids in aligning multiple pulls visually on tall pantry doors or matched drawer stacks. Steel construction paired with the Verona Bronze finish helps the pull visually tie in with other metal elements while delivering a firm feel that supports consistent user experience across the whole cabinet run.
The Berenson Transitional Advantage Two pull has a 5-1/16 inch (128 mm) center to center, which sets the exact hole spacing for mounting on cabinet doors and drawers.
The pull length is 7-3/8 inch, so it spans a noticeable portion of the drawer or door front, helping distribute pulling force across the surface.
The pull is made from steel with a Verona Bronze finish, providing a metal feel in hand and a bronze tone to coordinate with similar decorative hardware.
The pull projects 1-1/4 inch from the cabinet surface, giving space behind the handle so fingers can grip without contacting the door or drawer face.
The pull has a width of 1/2 inch and a base diameter of 3/8 inch, creating a slim grip line with compact contact points on the cabinet front.
This Verona Bronze cabinet pull is identified by manufacturer part number 9554-20VB-P, which ties directly to the Berenson Transitional Advantage Two Advantage Series design.
The Berenson Transitional Advantage Two pull in Verona Bronze offers a 5-1/16 inch (128 mm) center to center layout, 7-3/8 inch overall length, and 1-1/4 inch projection, giving clear mounting and clearance dimensions for cabinet work. Steel construction and a 1/2 inch wide profile deliver a slim but solid handle for doors and drawers that see regular use. With defined measurements and a bronze finish, this Advantage Series cabinet pull supports coordinated, repeatable installation across kitchens, baths, and storage cabinetry where matching hardware and consistent alignment are priorities.
Sold In: 1 Each
