Sugatsune DSI-1630 9-7/8" (250 mm) Center to Center Satin Stainless Steel Exterior Mount Door Pull, DSI-1630-30-25E

DSI Exterior Door Handle For Interior Or Exterior Use

DSI EXTERIOR DOOR HANDLE 314MM LONG SS identifies this Sugatsune DSI-1630 Series door pull as a stainless steel solution for entry or passage doors, so you get a purpose-built handle for interior or exterior applications. The handle is made from 304 stainless steel, which resists corrosion in typical door environments, helping the pull stay functional and looking consistent over time. A satin stainless steel finish diffuses reflections on the grip, which supports a clean, understated appearance on residential or commercial doors. The handle length is 314 mm, so it spans a substantial section of the door face, giving users a comfortable grab area. A center to center dimension of 9-7/8 inches, or 250 mm, sets the post spacing, which matters when laying out new holes or aligning with an existing pattern. This pull belongs to the DSI 110 Series, tying it into a defined Sugatsune system.

Key Stainless Door Pull Details For Projects

• The DSI-1630 Series identity links this handle to a specific Sugatsune family, which helps maintain design continuity when matching other DSI Series components on the same door run.
• The overall length of 314 mm defines the visual scale of the pull on the door, guiding you when balancing handle size against stile width and door height on interior or exterior openings.
• The 9-7/8 inch, or 250 mm, center to center dimension fixes the distance between posts, which is critical when drilling door faces or aligning with prior mount points during replacements.
• 304 stainless steel construction provides a stainless substrate throughout the handle, which supports consistent performance where the grip may see frequent contact and typical ambient moisture.
• The satin stainless steel finish controls surface sheen on the pull, which helps the handle blend with brushed stainless hinges, locks, and nearby architectural hardware on the door.
• Designation as an interior/exterior type pull confirms it is intended for both sides of a door, which lets you coordinate handles across spaces that transition from indoors to outdoors.

Mounting Layout And Handle Post Function

This Sugatsune DSI-1630-30-25E pull uses posts that are engineered differently for interior and exterior handles, so each side supports its specific mounting role. Posts for exterior handles are threaded to accept screws, which creates a direct mechanical connection through the threaded interface for exterior-side mounting. Posts for interior handles have set screws for DSI mounting kits, allowing the interior handle to be secured onto the kit hardware so the inside pull is locked in place. The 250 mm center to center spacing ties both posts into a fixed layout, simplifying door face marking and drilling during installation or retrofit. Because the web description specifies use with DSI mounting kits, this handle is designed to integrate with that system for its final attachment method.

Using This DSI-1630 Stainless Handle In Practice

Where This Sugatsune DSI-1630 Handle Fits Best

The Sugatsune DSI-1630 Series 9-7/8 inch center to center satin stainless steel exterior mount door pull fits doors where a stainless aesthetic and interior/exterior continuity are important. Its 314 mm overall length and 250 mm post spacing suit doors that benefit from a substantial pull area without overwhelming the stile. The satin stainless finish aligns well with other satin or brushed stainless hardware, helping maintain a unified look from hinges to locksets. Because it is labeled as an interior/exterior type, this handle is suited to doors that present pulls on both sides, so circulation paths feel consistent as users move between spaces. The DSI 110 Series designation also positions this handle within a broader DSI system, useful when building out multiple doors in the same project.

Why These Mounting Details Support Consistent Results

The exterior posts on this handle are threaded to accept screws, which provides a defined attachment interface that supports repeatable mounting on the exterior face of the door. Interior posts relying on set screws for DSI mounting kits allow the interior handle to clamp onto the kit, so the pull is positively engaged with the kit hardware. This division between threaded exterior posts and set screw interior posts helps the assembly distribute loads between sides while retaining a clean appearance at the grips. The fixed 250 mm center to center dimension also supports consistent drilling patterns across multiple doors, limiting layout variation when the same Sugatsune DSI-1630-30-25E handle is used throughout a project. Because the handle is made from 304 stainless steel with a satin finish, the contact surfaces remain uniform, supporting day-to-day use on both sides of the door.

Common Questions About The DSI-1630 Stainless Pull

Selecting This DSI Stainless Pull For Your Door

The Sugatsune DSI-1630-30-25E satin stainless steel exterior mount door pull delivers a defined 314 mm length and 250 mm center to center layout, so post spacing and visual scale are clearly established for your door. 304 stainless steel construction and a satin finish give the pull a straightforward material and appearance profile that lines up with many stainless hardware sets. With threaded exterior posts, interior posts designed for set screws, and stated use with DSI mounting kits, the handle slots into door assemblies built around the DSI system. For projects needing an interior/exterior type stainless pull from the DSI 110 Series, this model provides a specific, repeatable option.