Sugatsune DSI-1630 9-7/8" (250 mm) Center to Center Satin Stainless Steel Interior Mount Door Pull, DSI-1630-30-25I

DSI Interior Door Handle 314mm For Clean Pulls

DSI interior door handle 314mm long SS is a Sugatsune DSI-1630 Series interior mount door pull designed to give doors a solid, comfortable grasp point on interior projects. The handle is 9-7/8 inches (250 mm) center to center, so it spans enough door face to feel substantial while still fitting common interior door layouts. Material is 304 stainless steel in a satin finish, which resists everyday wear while presenting a low-glare, professional look across commercial or residential interiors. The handle is part of the DSI 110 Series, tying into a coordinated family of door pulls for consistent hardware selection on multi-door jobs. Posts on this interior handle are configured for use with DSI mounting kits, allowing the handle to be integrated into the DSI system where matching interior and exterior pulls are planned.

Key Stainless Door Pull Details For Projects

• The DSI-1630 Series identity groups this door pull into Sugatsune's system-based hardware line, simplifying repeat selection when matching pulls across several openings on the same job.
• The 9-7/8 inch (250 mm) center to center spacing gives a long gripping area, which helps users gain leverage on taller or heavier interior doors without crowding the stile.
• The 314 mm overall length aligns with the stated SAP description, giving installers a clear sense of handle coverage on the door face for layout and visual balance.
• 304 stainless steel construction provides a robust metal body, supporting long-term use on frequently operated doors in typical interior or light exterior environments.
• The satin stainless steel finish tones down reflection, which helps this pull blend into contemporary interiors while reducing visible fingerprints compared to shinier surfaces.
• The Sugatsune America brand and DSI 110 Series designation place this pull within a recognized decorative hardware range, aiding spec consistency across projects.

Interior Mount Pull Designed For DSI Kits

This interior mount door pull is specified for use with DSI mounting kits, so it slots into the DSI system when assembling interior pull hardware. The posts for interior handles have set screws for DSI mounting kits, giving a defined mechanical interface between pull and kit. That set-screw approach lets installers secure the handle to the kit posts without altering the handle body, which can streamline fit-up on repeat installations. Because the mounting intent is interior use with the DSI kits, this pull suits doors where through-bolt or coordinated kit-based mounting is planned within the DSI family.

Using This Sugatsune DSI-1630 Handle In Practice

Where The DSI-1630 Interior Handle Fits Best

The Sugatsune DSI-1630-30-25I interior mount door pull fits projects calling for an interior handle in satin stainless steel that works within the DSI mounting system. The 9-7/8 inch (250 mm) center to center spacing positions this pull well on standard interior doors, where a hand-length grip is needed without dominating the door stile. With 314 mm overall length, the handle gives a clearly defined vertical element on the door surface, which helps align it visually with other hardware and trim. The satin 304 stainless steel material lets the pull serve in decorative hardware and molding contexts where both appearance and metal construction matter. As an interior handle in the DSI 110 Series, it can be matched with related components in that series for unified hardware selection.

Details That Support Repeatable Door Pull Results

The DSI interior door handle 314mm long SS layout, at 250 mm center to center, provides a fixed drilling reference that can be repeated across multiple doors, helping maintain consistent spacing on a run of openings. Interior handle posts with set screws for DSI mounting kits create a defined clamping method onto the kit hardware, which reduces variation in how the handle locks to the door structure. Because the material is 304 stainless steel with a satin finish, the handle maintains its look as part of the door trim while tolerating frequent contact on interior traffic doors. The DSI-1630 Series and DSI 110 Series designations give specifiers and installers a traceable part identity, which aids reordering and matching existing installations when a project expands or needs additional openings outfitted later.

Common Questions About This DSI-1630 Door Pull

Select This DSI-1630 Pull For Coordinated Installs

The Sugatsune DSI-1630-30-25I interior mount door pull combines 304 stainless steel construction, a satin stainless finish, and a 9-7/8 inch (250 mm) center to center layout within the DSI 110 Series system. For projects that standardize on DSI mounting kits and need a 314 mm long interior handle, this model gives a defined size, material, and mounting intent under a consistent DSI-1630 Series identity. Choose this pull when a satin stainless DSI interior door handle 314mm long SS aligns with the door design and the DSI kit-based mounting plan.