Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DSI exterior door handle 430mm long SS identifies this Sugatsune DSI-1630 Series satin stainless steel exterior mount door pull as a 430 mm long handle designed for doors, so installers get a substantial pull length suited to full-size door applications. The 13-3/4 inch (350 mm) center to center dimension defines the post spacing, which guides precise hole layout when preparing the door. This pull is part of the DSI 110 Series, tying it directly to a known mounting system and making product identification straightforward on multi-opening projects. The handle uses 304 stainless steel, which provides a robust material choice for typical door environments where corrosion resistance and strength matter. Its satin finish delivers a low-glare appearance, which helps the pull blend into commercial or residential settings while still looking finished and professional on the door surface.
This Sugatsune DSI-1630-30-35E door pull is designed for use with DSI mounting kits (sold separately), so the mounting interface is purpose-built around that system. Posts for exterior handles are threaded to accept screws, which provides a direct mechanical connection through the threaded posts when using appropriate fasteners. Posts for interior handles have set screws for DSI mounting kits, allowing the interior side to clamp to the kit hardware for a secure fit. These post-specific details mean the same pull design can be used on both sides of a door assembly when paired with the correct DSI components. The satin 304 stainless steel and defined center to center dimension support clean, repeatable alignment when installing multiple pulls in a project.
This Sugatsune DSI-1630 Series satin stainless steel exterior mount door pull fits door applications that call for an exterior handle with a 13-3/4 inch (350 mm) center to center spacing. The 430 mm overall length provides a substantial grip area, which suits doors that benefit from a full-height pull section. Its classification under Decorative Hardware & Moldings and Handles and Pulls identifies it as a visible, design-forward component, appropriate when the pull contributes to the finished look of the door. The use of 304 stainless steel aligns the handle with environments where a metal pull is preferred for strength and surface durability. Because the posts for exterior handles are threaded to accept screws, this pull integrates into door constructions where through-post screw engagement is part of the fastening method.
The DSI 110 Series association tells installers that this door pull is engineered to work with DSI mounting kits (sold separately), which gives the mounting points and post design a defined hardware ecosystem. For exterior handles, threaded posts that accept screws create a clear engagement path for fastening, aiding in consistent clamping force when tightened. For interior handles, posts with set screws for DSI mounting kits allow the handle to lock onto the mounting hardware, supporting a firm connection once the set screws are tightened. The specified 13-3/4 inch (350 mm) center to center dimension lets installers transfer measurements directly to drilling templates, which helps keep multiple doors in a project visually aligned. Combined with the satin 304 stainless steel finish, these details contribute to a uniform appearance across doors while maintaining consistent handle positioning from one opening to the next.
The Sugatsune DSI-1630-30-35E pull is described as a DSI exterior door handle 430mm long SS, so installers can plan door layouts around a 430 mm handle length.
The Sugatsune DSI-1630 Series door pull has a 13-3/4 inch (350 mm) center to center spacing, which sets the required distance between mounting holes.
The DSI 110 Series pull uses 304 stainless steel with a satin finish, giving the handle a metal construction with a low-glare, uniform surface.
The exterior handle posts on this door pull are threaded to accept screws, providing a defined interface for fastening through the posts.
The interior handle posts have set screws for DSI mounting kits, allowing the handle to lock onto the mounting hardware using those set screws.
This Sugatsune stainless steel handle is for use with DSI mounting kits (sold separately), aligning it with the DSI 110 Series mounting approach.
The Sugatsune DSI-1630-30-35E satin stainless steel exterior mount door pull combines a 430 mm overall length with a 13-3/4 inch (350 mm) center to center spacing, giving clear layout dimensions. Its 304 stainless steel construction and DSI 110 Series designation align with DSI mounting kits (sold separately) and defined post designs for interior and exterior handles. For projects that benefit from consistent hole patterns and a satin stainless appearance across multiple doors, this handle offers a clearly specified option ready to integrate into DSI-based installations.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SLDKIT-2/30-1 Mfr# DKIT-2/30-1 | Sugatsune single handle mounting kit for dsi-1630-30 dkit-2/30-1 | ||||
Sold in: 1 Each | SLDKIT-4/30-1 Mfr# DKIT-4/30-1 | Mounting Kit for DSI Door Handles Kit for DSI-1630-30 - Sugatsune DKIT-4/30-1 | ||||
Sold in: 1 Each | SLDKIT-5/30 Mfr# DKIT-5/30 | Single Handle Installation for Concrete Walls |
