Sugatsune DSI-1630 Series 23-5/8" (600 mm) Center to Center Satin Stainless Steel Interior Mount Door Pull, - DSI-1630-30-60I

DSI Interior Door Handle For Clean Stainless Look

DSI interior door handle 721mm long describes a stainless steel pull designed for interior doors where a long, continuous grip is preferred. The handle is part of the Sugatsune DSI-1630 Series, so it matches that family visually on multi-door projects. A center to center dimension of 23-5/8 inches, or 600 mm, lays out post locations clearly for drilling and alignment. The handle is identified as an interior mount door pull, meaning it is intended for mounting on the interior side using the specified DSI mounting system. Sugatsune America branding signals this handle belongs to the Sugatsune decorative hardware line for consistent styling. The satin stainless steel appearance provides a muted metallic look that suits commercial or residential interiors where glare is undesirable.

Key Stainless Door Pull Details For Projects

• The DSI-1630 Series designation ties this pull to a defined Sugatsune product family, which aids in coordinating with other DSI 110 Series components on the same job.
• A 23-5/8 inch, or 600 mm, center to center dimension sets precise post spacing, helping lay out drill points and keeping multiple doors visually aligned along a run.
• The SAP description stating 721mm long shows the overall handle length is greater than the fixing centers, providing generous hand clearance while fitting standard door proportions.
• Material listed as 304 stainless steel means the pull body is formed from a widely used stainless grade, supporting long-term use in busy interior circulation areas.
• The satin finish detail indicates the surface is brushed rather than mirror polished, helping the handle resist visible fingerprints in high-contact applications.
• The manufacturer part number DSI-1630-30-60I uniquely identifies this interior pull, simplifying reorders or spec matching when repeating the hardware on additional openings.

Mounting Details For Interior Door Installation

This product is described as an interior mount door pull, so it is intended for use on the interior face of a door where the DSI mounting system is used. The web description states the pull is for use with DSI mounting kits, which establishes the connection method and ensures the handle works within that specific mounting approach. Posts for interior handles are noted as having set screws for DSI mounting kits, so the posts grip onto the mounting components rather than relying on a threaded stud. That post construction supports a secure engagement with the matching kit while keeping the visible side of the handle clean and uninterrupted.

Using This Sugatsune Stainless Door Pull

Where This 600 mm Center Pull Is Applied

The product is categorized under decorative hardware and moldings, handles and pulls, placing it in applications where the handle contributes to both operation and appearance of the door. As an interior mount door pull made from 304 stainless steel, it suits interior doors that benefit from a robust metal grip and a stainless visual theme. The 721mm overall length described in the SAP text gives the handle a substantial vertical presence, which works well on full-size interior doors that need an easy-to-grab pull point. A 600 mm center to center spacing sets the vertical fixing distance, so the handle spans a significant portion of the door height and offers a long grabbing area for users.

The satin finish stated in the web description positions this pull in projects that call for a brushed stainless look rather than a highly reflective surface. That surface characteristic helps the handle visually blend with other satin stainless components on the door, such as hinges or lock trim that share a similar brushed tone. The connection to the DSI 110 Series in the web description ties this handle to a broader system, which assists when designers and installers want multiple pulls and related components to carry the same design language across a hallway or room.

Details That Support Repeatable Mounting Results

The clearly specified 23-5/8 inch, or 600 mm, center to center dimension supports repeatable layout when several doors in a project use the same Sugatsune DSI-1630-30-60I door handle. Installers can mark a consistent vertical distance for the posts from door to door, producing an aligned visual line through a corridor. The SAP description noting 721mm long indicates the handle length beyond the post centers, so the pull extends above and below the fixing points, giving installers a predictable appearance relative to door height. Posts for interior handles are described as having set screws for DSI mounting kits, which defines how the posts engage the mounting system and helps maintain consistent clamping force when tightening. The web description note that this handle is for use with DSI mounting kits links the pull to that specific mounting method, so projects built around the DSI system can repeat the same installation pattern. Because the material is 304 stainless steel with a satin finish, the surface condition and hardness support a stable feel at the grip area over repeated use in interior circulation paths.

Common Questions About This DSI Stainless Pull

Select This Sugatsune Pull For Stainless Door Runs

The Sugatsune DSI-1630 Series 23-5/8 inch center to center satin stainless steel interior mount door pull brings together 304 stainless construction, a satin finish, and a 721mm overall length for tall interior doors. The defined 600 mm center spacing and interior posts with set screws for DSI mounting kits support consistent layout across multiple doors. Selecting the DSI-1630-30-60I part number from Wurth Baer Supply aligns your hardware choice with the DSI 110 Series stainless system for coordinated interior projects.