Sugatsune DSI-2000 Series 7-7/8" (200 mm) Center to Center Satin Stainless Steel Interior Mount Door Pull, - DSI-2000-20-20I

DSI Interior Door Handle 300mm For Clean Pulls

DSI interior door handle 300mm gives you a straight, modern pull for interior doors using the Sugatsune DSI-2000 Series layout. The handle is described as 7-7/8 inch (200 mm) center to center, so installers set post holes accurately for the pull spread on the door face. Material is 304 stainless steel in a satin finish, which provides a consistent look in commercial or residential interiors while matching other satin stainless components on the job. The SAP description states the handle length as 300 mm, which defines the visible bar size you will lay out on the door. This model is identified as an interior mount door pull, so it fits the interior side of the opening when paired with the correct mounting method. The manufacturer part number DSI-2000-20-20I ties this specific size, finish, and style to the DSI 2000 Series family.

Key Stainless Interior Pull Details For Projects

• The DSI 2000 Series designation groups this pull with other Sugatsune DSI-2000 components, helping you match style and proportions across multiple doors on the same project.
• Material specified as 304 stainless steel gives a solid metal construction, supporting a substantial feel when operated on interior or exterior openings where that alloy is used.
• The satin finish on the stainless surface produces a low-glare appearance, which coordinates well with other brushed hardware and helps keep fingerprints visually subdued in normal use.
• The handle is described with 7-7/8 inch (200 mm) center to center mounting, giving installers a fixed drilling dimension for consistent alignment from door to door.
• The SAP description listing the handle as 300 mm long defines the overall bar length, letting you judge its visual scale against the door width and surrounding hardware.
• The product name states this as an interior mount door pull, so it is intended for mounting on the interior side in doors using the DSI system.

Interior Mount Door Pull Setup And Alignment

This interior mount door pull is specified with 200 mm center to center post spacing, so hole layout on the door can follow that exact dimension for predictable alignment. The posts for interior handles are described as having set screws for DSI mounting kits, which means the handle secures onto the mounting interface using those set screws. That design lets you position the mounting kit on the door and then lock the pull to the posts, supporting a neat finish on the interior face. The satin stainless finish stays consistent across the posts and bar, so your layout marks line up to a uniform-looking assembly once tightened. The DSI 2000 Series naming makes it straightforward to match this installation pattern with other DSI 2000 Series components used on related openings.

Using This Sugatsune DSI-2000 Door Pull In Practice

Where This 304 Stainless Door Pull Fits Best

The web description identifies this as the DSI 2000 Series, which places the pull within Sugatsune decorative hardware commonly used on doors where a linear grip is desired. The interior/exterior type notes that posts for interior handles have set screws for DSI mounting kits, so this particular configuration is suited to the interior side of doors built around that system. The 7-7/8 inch (200 mm) center to center dimension supports use on standard door styles where this spread gives a balanced look between stile edges. The SAP description calling out 300 mm long SS indicates a 300 mm overall handle length in stainless steel, giving the door a noticeable, continuous grip area that reads clearly against wood, laminate, or similar surfaces.

Details That Support Repeatable Door Pull Results

The stated material, 304 stainless steel, delivers consistent post and bar geometry, so drilled holes at 200 mm center to center align with the pull ends every time. The satin stainless steel finish means each installed handle presents the same brushed appearance, reducing visual variation across a run of doors on the same corridor or room line. Interior posts with set screws for DSI mounting kits let you fasten the kits to the door first, then secure the handle by tightening the set screws, which supports straight, repeatable orientation of the bar relative to the door edge. The manufacturer part number DSI-2000-20-20I directly identifies this combination of center to center dimension, 300 mm length, stainless material, and satin finish, so repeated orders deliver the same installation geometry.

Common Questions About This DSI Interior Door Handle

Select This Satin Stainless Pull For DSI Installations

The Sugatsune DSI-2000-20-20I interior mount door pull combines 304 stainless steel construction, satin finish, 300 mm length, and 200 mm center to center spacing for a defined installation layout. When your project calls for a DSI 2000 Series interior pull with this specific spread and visual length, this model keeps material, finish, and geometry aligned across doors. Use the part number and dimensions to match this handle to other DSI 2000 Series components on the same job for consistent results.