Sugatsune DSI-2000 Series 9-7/8" (250 mm) Center to Center Satin Stainless Steel Interior Mount Door Pull, - DSI-2000-20-25I

DSI Interior Door Handle 400mm Long For Smooth Pulls

DSI interior door handle 400mm long gives you a straight 400 mm stainless steel pull that creates a consistent grab point along the door, which helps users open and close interior doors with a predictable hand position. The DSI-2000 Series design identifies this handle as part of Sugatsune's coordinated line, so installers can match pulls across multiple doors on the same project. Center to center length of 9-7/8 inches, or 250 mm, sets fixed post spacing, which simplifies drilling layout and repeatable installation on multiple doors. Material listed as 304 stainless steel provides corrosion-resistant metal, which supports use on interior doors that may see humidity or regular contact. The satin stainless steel finish diffuses reflections, which helps hide fingerprints and small marks in daily use. Interior mount door pull style defines this part as suited for interior-facing applications where a clean, simple pull action is needed.

Key DSI-2000 Series Details That Help On Site

• The DSI 2000 Series designation signals a consistent style and geometry, which helps installers keep a uniform look when using multiple Sugatsune pulls throughout a project.
• Material listed as 304 stainless steel provides a hard, stable substrate, which supports dependable feel when users grip and pull on interior doors.
• The satin stainless steel finish softens the surface sheen, which can help maintain a tidy appearance in high-touch areas because fine marks are less noticeable.
• The interior mount door pull description identifies the part as a pull handle, which lets installers plan door function and clearances around a fixed, graspable bar rather than a knob.
• The product name callout of 9-7/8 inch, or 250 mm, center to center length defines post spacing, which supports accurate hole placement and repeatable drilling jigs on the job.

Interior Mount Door Pull Layout And Fit

Sugatsune DSI-2000 interior door handle specification as an interior mount pull guides installers to use it on interior-facing doors, which aligns the hardware layout with typical traffic patterns inside a space. The 9-7/8 inch center to center measurement sets a fixed distance between mounting posts, which allows fabricators to program or mark repeatable hole locations on wood, composite, or other door materials. Listed overall length of 400 mm provides a longer grip area around the posts, which helps users of different heights find a comfortable hand position. Satin stainless steel finish pairs with the interior mount description to support projects where a modern, muted metal look is preferred across multiple interior openings.

Using The Sugatsune DSI-2000 Pull In Real Projects

Where This Interior Mount Door Pull Fits Best

The DSI INTERIOR DOOR HANDLE 400MM LONG SS description identifies this pull as a 400 mm long stainless handle, which suits interior doors that benefit from an extended grasp area. The DSI-2000 Series naming connects the pull to Sugatsune America hardware families, which helps designers and installers align this pull with other Sugatsune components on the same job. Web details listing the handle as an interior/exterior type with posts for interior handles using set screws for DSI mounting kits describe the interior handle side as set-screw based, which concentrates clamping at the posts. That structure can support interior applications where the pull is anchored through a mounting kit on the opposite face. The satin stainless steel finish works with the handle's interior designation to fit commercial or residential interiors where a neutral, brushed metal aesthetic is specified. Combining 400 mm length with 250 mm center to center spacing yields a pull that covers more door surface than a short cabinet pull, which can feel proportionate on taller or wider interior doors.

Details That Support Consistent Mounting And Results

The 9-7/8 inch, or 250 mm, center to center spacing for this 304 stainless steel interior mount door pull creates a precise drilling pattern, which supports the use of templates or CNC setups for repeatable mounting. Material stated as 304 stainless steel gives the posts and bar a robust structure, which maintains alignment when the handle is tightened against DSI mounting kits on the door. Web information specifying that posts for interior handles have set screws for DSI mounting kits explains that the interior handle fastens to those kits via set screws, which lets installers secure the pull to the prepared studs without through-bolting from the visible face. The satin stainless steel surface interacts well with set-screw attachment because the finish is less prone to showing minor tool contact during final adjustment. Being part of the DSI 2000 Series means the handle geometry is defined within that line, which supports consistent results when multiple doors are outfitted with the same model DSI-2000-20-25I on a project.

Common Questions About This Sugatsune Door Pull

Select The Right DSI-2000 Pull For Your Project

The Sugatsune DSI-2000-20-25I door pull pairs 400 mm overall length with 250 mm center to center spacing, which suits interior doors needing a longer grasp and consistent post layout. 304 stainless steel construction with a satin stainless steel finish delivers a defined look that coordinates across the DSI 2000 Series. Posts for interior handles using set screws for DSI mounting kits support a mounting approach built around those kits. For interior openings where an extended, stainless steel interior mount door pull is required, this DSI interior door handle 400mm long offers a clearly defined size, finish, and mounting style to match project drawings.