Sugatsune DSI-2000 11-13/16" (300 mm) Center to Center Satin Stainless Steel Exterior Mount Door Pull, DSI-2000-20-30E

DSI Exterior Door Handle 450mm For Doors

DSI exterior door handle 450mm describes a pull from the Sugatsune DSI 2000 Series that functions as an exterior mount door pull, giving doors a defined gripping point for opening and closing in everyday use. The handle is identified in the SAP description as DSI EXTERIOR DOOR HANDLE 450MM LONG SS, so it provides a 450 mm long grasp area that suits larger doors where a longer pull improves leverage. The product name specifies an 11-13/16 inch, or 300 mm, center to center dimension, which sets the spacing between mounting posts so fabricators can drill accurate holes during layout. The handle is classed under Decorative Hardware & Moldings in Handles and Pulls, aligning it with door and cabinet hardware applications where appearance and function both matter. As part of the Sugatsune DSI 2000 Series, the pull matches other pieces in the same line for consistent styling across multiple openings.

Key DSI 2000 Series Pull Details In Use

• The DSI 2000 Series designation ties this pull to a defined product family, simplifying specification when matching other Sugatsune DSI handles in a project.
• The 11-13/16 inch (300 mm) center to center measurement governs mounting hole locations, supporting repeatable drilling and alignment across several doors.
• The SAP description stating 450 mm long SS indicates the overall length, helping installers coordinate pull size with door height and stile width for balanced proportions.
• The material listed as 304 stainless steel provides a stainless base metal, which supports use on doors where a stainless construction is preferred.
• The satin finish description defines the surface appearance, allowing designers and installers to coordinate this pull with other satin stainless steel door hardware.
• The Category entry Handles and Pulls confirms the product role as a functional door pull, helping buyers quickly identify it as a gripping component rather than a hinge or latch.

Exterior Mount Door Pull Layout And Fit

The product name identifies this Sugatsune America pull as an exterior mount door pull, which means the posts are arranged for mounting on the outside face of a door in a typical entrance configuration. The 300 mm center to center measurement directly guides drilling layout, so installers can transfer these dimensions to the door surface for precise post spacing. With the overall 450 mm length from the SAP description, the handle spans a noticeable vertical section of the door, creating a larger gripping area that suits taller or heavier doors. Because this pull is part of the DSI 2000 Series, installers can align it with matching series hardware when planning multi-door runs, keeping mounting references consistent across several openings. The Handles and Pulls product class further confirms that its geometry is intended for hand operation rather than for structural support tasks.

Where This Sugatsune Exterior Pull Excels

Use On Interior Or Exterior Door Surfaces

The web description lists an Interior/Exterior type, stating that posts for exterior handles are threaded to accept screws, so this pull can be used in an exterior role where through-screws engage those threads for a secure mount. That same Interior/Exterior listing notes that posts for interior handles have set screws for DSI mounting kits, which defines a different connection style when applying a coordinated interior handle on the opposite face. Because the handle is made from 304 stainless steel, it places a stainless material at the gripping point on doors where stainless hardware is part of the design. The satin finish described in the DSI 2000 Series details softens reflections on that stainless surface, which can help the pull sit visually with other satin stainless steel door components. Located in the Decorative Hardware & Moldings category, the pull supports applications where visual consistency with other decorative elements is important.

Details That Support Consistent Mounting Results

The stated 300 mm center to center dimension gives a fixed and repeatable distance between posts, which supports consistent hole drilling on multiple doors so every pull aligns at the same spacing. The SAP description defining 450 mm long SS tells installers the linear extent of the pull, which helps place it at a comfortable reach height on doors while maintaining clearance from edges. Posts for exterior handles being threaded to accept screws, as described in the web text, means the mounting relies on screw threads engaging the posts, creating a predictable fastening method for exterior faces. For interior handles, posts with set screws for DSI mounting kits create a distinct attachment style that works with those kits, allowing coordinated interior hardware on the same door. Having these mounting behaviors clearly separated by interior and exterior roles streamlines planning when specifying pairs of handles across a project.

Door Hardware Questions About This DSI Pull

Select This Satin Stainless Pull For Your Next Door

The Sugatsune DSI-2000-20-30E exterior mount door pull combines a 300 mm center to center mounting dimension with a 450 mm long 304 stainless steel body, giving doors a defined gripping span in satin stainless. As part of the DSI 2000 Series from Sugatsune America, it aligns with other series components for coordinated decorative hardware layouts. With threaded posts for exterior handles to accept screws and interior posts designed with set screws for DSI mounting kits, the system supports clear roles on each side of the door. For projects requiring a satin stainless steel exterior mount pull within the Handles and Pulls category, this DSI exterior door handle 450mm offers a precisely defined option.