DSI 2000 Series door pull identifies this handle as part of Sugatsune Americas DSI-2000 family, which helps match it with DSI mounting kits for consistent installations across multiple doors. The handle uses 304 stainless steel, which provides a stainless substrate suited for typical interior or exterior door environments where a stainless pull is specified. A satin stainless steel finish diffuses reflections, which helps doors read clean and professional in commercial or residential projects. The pull is described as 700 mm long, giving a substantial handle length for a full hand grip along taller or heavier doors. Its 19-11/16 inch, or 500 mm, center to center dimension controls the post spacing, which guides drilling layouts when aligning this pull with other hardware on the door.
The handle posts are described as exterior mount, which identifies the pull as suited for mounting on the outside face of a door where a through-bolt or related system is used. Posts for exterior handles are threaded to accept screws, so the installer can engage the screw directly into the post when drawing the handle tight to the door surface. Posts for interior handles have set screws for DSI mounting kits, which shifts the connection to a set screw clamping onto the kit hardware rather than relying on threads in the post itself. These distinct post designs give a clear mounting interface on each side of a paired door installation.
The product description states that this DSI 2000 Series pull is an interior/exterior type, which means the same handle design can appear on both sides of a door where the specification calls for a consistent look. On the exterior side, the posts are threaded to accept screws, so the pull can be secured by drawing screws into the threaded posts from the opposite side or through a mounting system designed for threaded engagement. On the interior side, posts for interior handles use set screws for DSI mounting kits, which allows an interior pull from the same series to clamp to the mounting kit hardware without cutting threads into the post body. Together, these details support a coordinated handle layout on both faces of a door while relying on different post interfaces matched to the side of the opening.
The 19-11/16 inch, or 500 mm, center to center dimension is a primary layout reference, so once the installer establishes that vertical spacing on one door, the same measurement can be repeated on additional doors for a uniform sightline. The 700 mm overall length provides extra handle beyond the post centers, which gives additional grip area above and below the mounting points, useful when users of different heights operate the door. Use of 304 stainless steel across the pull creates a single material from posts to grip, which keeps drilling and handling straightforward because the installer is working with the same substrate at each contact point. The satin stainless steel finish also supports repeatable results because the low-glare surface tends to mask minor handling marks better than a mirror finish during installation. Posts for interior handles using set screws for DSI mounting kits introduce a clamping-style connection, which allows the interior handle to be positioned over the mounting kit hardware and locked in place by tightening the set screws in line with the kit design.
The DSI-2000-20-50E pull has a 19-11/16 inch, or 500 mm, center to center spacing, which sets the drilling distance between its mounting posts for consistent layout across doors.
The SAP description identifies the pull as 700 mm long, giving a substantial handle length that provides grip area above and below the 500 mm post spacing on the door.
The DSI 2000 Series pull is made from 304 stainless steel, which provides a stainless construction suited for interior or exterior locations where a stainless handle is specified.
The pull uses a satin stainless steel finish, which creates a low-glare appearance that coordinates with other satin stainless door components on the opening.
For exterior handles, the posts are threaded to accept screws, allowing the handle to be drawn tight to the door by engaging screws directly into the threaded posts.
Posts for interior handles in the DSI 2000 Series use set screws for DSI mounting kits, so the handle clamps to the mounting hardware through the set screw connection.
The DSI-2000-20-50E satin stainless steel exterior mount door pull combines 304 stainless steel construction, a 700 mm length, and 500 mm center to center spacing, so door layouts can follow a consistent pattern. Matching exterior threaded posts with interior posts that use set screws for DSI mounting kits keeps both sides of the door aligned to the same DSI 2000 Series family. Selecting this Sugatsune America pull through Wurth Baer Supply ties your project to a defined handle series and post configuration that support repeatable drilling, mounting, and visual results across multiple openings.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SLDKIT-5/20 Mfr# DKIT-5/20 | Sugatsune single handle concrete mounting kit for dsi-2000-20-concrete dkit-5/20 | ||||
Sold in: 1 Each | SLDKIT-4/20-1 Mfr# DKIT-4/20-1 | Mounting Kit for DSI Door Handles Kit for DSI-2000-20 - Sugatsune DKIT-4/20-1 | ||||
Sold in: 1 Each | SLDKIT-2/20-1 Mfr# DKIT-2/20-1 | Sugatsune single handle mounting kit for dsi-2000-20 dkit-2/20-1 |