Sugatsune DSI-2000 9-7/8" (250 mm) Center to Center Satin Stainless Steel Interior Mount Door Pull, DSI-2000-30-25I

DSI Interior Door Handle 550mm For Interior Mount

DSI interior door handle 550mm identifies this pull as the DSI-2000 Series interior mount door handle described as 550mm long in stainless steel, so installers know they are selecting a substantial handle sized for full-height interior or entry-style doors. The product name specifies a 9-7/8 inch, or 250 mm, center to center dimension, which helps when laying out through-bolt or mounting-kit hole spacing for consistent alignment across multiple doors. Material listed as 304 stainless steel provides a corrosion-resistant base metal, important for interior or sheltered exterior locations where moisture or hand oils are present. The satin stainless steel finish gives a low-glare surface that tends to mask fingerprints and minor scuffs better than polished finishes in everyday use. Identification as an interior mount door pull clarifies that this component is used on the interior side of the door, pairing with the DSI system layout.

Practical Details That Support Door Handle Selection

• The DSI 2000 Series designation ties this pull to a defined Sugatsune family, helping shops standardize appearance and hardware choices across multiple openings for a coordinated project look.
• The 9-7/8 inch (250 mm) center to center dimension provides a clear drilling reference, which supports accurate jig setup and repeatable spacing on multiple doors without recalculating every layout.
• Material listed as 304 stainless steel offers a robust construction base, which supports long-term handling on frequently used doors in residential or light commercial interiors.
• The satin stainless steel finish produces a brushed appearance, which helps higher-traffic doors maintain a clean look by visually softening minor surface marks from day-to-day contact.
• Use with DSI mounting kits is specified, which aligns the handle with a known mounting solution so installers can plan hole size and location around that established attachment method.

Interior Mount Door Pull Layout And Fit

The 9-7/8 inch (250 mm) center to center specification defines the distance between post mounting points, giving installers a direct dimension to transfer to drilling templates or shop drawings. The SAP description listing the handle as 550mm long indicates overall bar length, which helps determine where the handle will sit on the door stile and how much grab area is available above and below the fixing points. Identification as an interior mount door pull clarifies its placement on the interior face of a door, helping coordinate with any exterior hardware set on the opposite side. Reference to use with DSI mounting kits defines the intended fastening interface, so the handle works within that specific system layout when planning bore diameters and clearances.

Using The Sugatsune DSI-2000 Door Pull In Projects

Where This DSI 2000 Series Door Pull Fits

The Web description names this product as part of the DSI 2000 Series, placing it within Sugatsunes decorative hardware and moldings category for handles and pulls, so it suits projects where a consistent modern pull style is desired. The SAP description calling it an interior door handle and the Web description listing interior/exterior type show that this model is suited for interior use and can coordinate with related exterior handles within the DSI approach. The satin stainless steel finish and 304 stainless steel material align with door applications where a metal pull is preferred over wood or plastic, supporting a contemporary aesthetic on doors that benefit from a straight-bar style grip. The overall 550mm length makes this pull appropriate for doors where a longer vertical handle aids grab comfort and visual proportion along the stile.

Why These Stainless Details Support Repeatable Results

The specified 304 stainless steel material gives a known grade of stainless, which helps shops plan for machining edges near the posts or cleaning after installation without worrying about mismatched metals in the pull itself. The satin stainless steel finish provides a uniform brushed surface, contributing to consistent appearance when multiple DSI-2000-30-25I handles are installed along a corridor or within a bank of closets. The Web description states that posts for interior handles have set screws for DSI mounting kits, so the pull is designed to secure to those kits using set-screw engagement rather than threaded posts, which matters when selecting the correct mounting kit style for the interior side. The same description notes that posts for exterior handles are threaded to accept screws, clarifying that within the broader DSI system, the interior handle version is distinguished by its set-screw post design; this distinction supports accurate part selection when planning matching interior and exterior pulls around one door.

Key Questions About This Sugatsune Door Pull

Select This Satin Stainless Pull For DSI Layouts

The DSI-2000-30-25I combines a 550mm long bar with a 9-7/8 inch, or 250 mm, center to center spacing, giving clear mounting references for door fabrication. 304 stainless steel with a satin stainless finish suits decorative hardware and moldings projects that call for a brushed stainless look. Interior posts with set screws for DSI mounting kits align this pull with the DSI system approach, simplifying selection when matching interior handles to related exterior hardware. For projects built around Sugatsune DSI 2000 Series handles and pulls, this door pull provides the defined dimensions and material details needed for consistent results from shop layout through final door installation.