Sugatsune DSI-2000 Series 13-3/4" (350 mm) Center to Center Satin Stainless Steel Exterior Mount Door Pull, - DSI-2000-30-35E

DSI Exterior Door Handle 650mm For Doors

DSI exterior door handle 650mm identifies this Sugatsune DSI-2000 Series satin stainless steel door pull as a long, substantial grip for demanding door applications. The handle uses 304 stainless steel, which provides a corrosion-resistant base material that suits both interior and exterior environments where moisture and handling are routine. The pull has a 13-3/4 inch, or 350 mm, center-to-center dimension, which sets the mounting hole spacing and helps with layout when drilling or aligning with existing holes. This handle is part of the DSI 2000 Series, tying it to a consistent family of pulls that share a common design language on a project. The satin stainless steel finish offers a muted surface that helps reduce the visual impact of fingerprints compared to bright polished metal in everyday use. As a branded Sugatsune America product, it connects to a line known in the trade for architectural and decorative hardware.

Key DSI-2000 Pull Details For Projects

• The DSI 2000 Series designation identifies this pull as part of a coordinated family, which helps maintain a consistent look across multiple doors in a job.
• The 13-3/4 inch (350 mm) center-to-center size fixes the mounting hole spacing, which simplifies drilling patterns and alignment on new or replacement installations.
• The overall 650 mm length described in the SAP information signals a tall handle proportion, which provides generous gripping area along the door face.
• The 304 stainless steel material provides a corrosion-resistant base, which supports use on interior or exterior doors exposed to touch and ambient conditions.
• The satin stainless steel finish gives the surface a subdued sheen, which helps doors read more architectural and can reduce the visual impact of handling.

Mounting Details For DSI-2000 Door Pull

This Sugatsune DSI-2000 Series door pull is identified as an exterior mount handle, which positions the grip on the outside face of the door leaf. The specified 13-3/4 inch (350 mm) center-to-center dimension defines the distance between mounting posts, guiding hole placement for clean alignment. Posts for exterior handles are threaded to accept screws, which establishes a secure mechanical connection when used with appropriate fasteners. Posts for interior handles have set screws designed for DSI mounting kits, which allows the interior side of the assembly to clamp onto the door through the mounting system. The handle is specified for use with DSI mounting kits, which connects it to a compatible attachment method tailored to this product line. These combined details give installers clear reference points for post locations and fastening style when planning the door preparation.

Using This Sugatsune Exterior Door Handle In Practice

Where This 304 Stainless Door Pull Fits Best

The Sugatsune DSI-2000-30-35E door pull is described as an exterior mount handle, which positions it well for outside faces of doors that benefit from a fixed bar pull. Its 650 mm length, referenced in the SAP description, creates a tall grip area that suits full-height or wider doors where a longer pull supports a comfortable reach. The 13-3/4 inch (350 mm) center-to-center mounting dimension makes this handle suitable where that specific spacing can be laid out or already exists, providing a clear target for drilling templates or retrofit work. Being made from 304 stainless steel, the handle suits interior or exterior type applications, aligning with environments where stainless material performance is desirable. The satin stainless steel finish allows the handle to sit comfortably in decorative hardware and moldings projects where a modern but understated look is preferred.

Mounting Design That Supports Consistent Results

The posts for exterior handles on this DSI 2000 Series pull are threaded to accept screws, creating a defined fastening interface that supports solid attachment to the door substrate. This threaded design gives installers a predictable way to tighten the handle from one side, which helps achieve repeatable clamping pressure across multiple doors on a project. Posts for interior handles use set screws for DSI mounting kits, tying the inside pull connection to a dedicated mounting system designed for this series. The specified use with DSI mounting kits aligns the interior posts and set screws with hardware engineered to work together, which can support more consistent alignment of the pull relative to the door face. The 13-3/4 inch (350 mm) center-to-center dimension works as a fixed reference that simplifies layout, helping maintain straight, level pulls from door to door when the same measurement is repeated.

Common Questions About This Sugatsune Door Pull

Selecting This DSI Exterior Door Handle For Your Job

The combination of a 650 mm length, 13-3/4 inch (350 mm) center-to-center spacing, and satin 304 stainless steel construction defines this Sugatsune DSI-2000 Series exterior door pull as a precise choice for architectural doors. The threaded exterior posts and interior posts with set screws for DSI mounting kits give a clear fastening approach on both sides of the door. When a project calls for an exterior mount pull that matches the DSI 2000 Series look and uses stainless steel material, this DSI exterior door handle 650mm offers a defined set of dimensions and mounting details that align with that intent.