DSI interior door handle 900mm long SS provides a satin stainless steel pull designed as an interior mount door handle, giving doors a clean, modern gripping surface for regular opening and closing in commercial or residential spaces. The DSI 2000 Series designation identifies it as part of Sugatsune Americas coordinated handle line, helping match this pull with other DSI 2000 Series components on a project. The 23-5/8 inch (600 mm) center to center dimension sets a consistent post spacing, which simplifies layout when drilling through doors or aligning to existing mounting points. Material specified as 304 stainless steel delivers a solid metal construction, which supports long-term use where a rigid pull is needed. The satin finish provides a subdued stainless appearance, which helps the handle blend with common architectural stainless hardware and reduces visible fingerprints compared to highly polished surfaces.
The 23-5/8 inch (600 mm) center to center dimension defines where the handle posts sit relative to each other, so installers can mark and drill door faces using this fixed spacing. The product is described as an interior mount door pull, directing its use to interior-facing applications where an interior grip is required. Posts for interior handles have set screws for DSI mounting kits, so the handle engages with the mounting hardware by tightening set screws, creating a concealed, secure connection at each post. The note that the DSI 2000 Series pull is for use with DSI mounting kits indicates the handle is part of a system where the mounting kit interfaces with the door and the posts interface with the kit. Posts for exterior handles are threaded to accept screws, which contrasts with the interior version and highlights that interior mounting uses set screws rather than threaded posts.
The Sugatsune DSI-2000-30-60I door pull is identified as an interior mount door pull, so it serves on the interior side where a user needs a fixed pull to operate the door. The 900 mm length described in the SAP text gives a tall handle profile along the door face, creating a vertical gripping area that suits full-height or larger doors. With 23-5/8 inch (600 mm) center to center spacing between posts, the handle fits installations where that dimension works with the door stile width and any lock or latch hardware layout. The satin stainless steel finish allows the handle to visually integrate with satin stainless hinges, pulls, or other decorative hardware mentioned in the product category, keeping the interior hardware appearance consistent across cabinetry or doors.
The statement that posts for interior handles have set screws for DSI mounting kits means each interior post clamps onto the mounting kit via set screws, which helps create a repeatable attachment method across multiple doors using the same system. For projects that also use exterior DSI 2000 Series handles, the note that posts for exterior handles are threaded to accept screws establishes a clear difference between interior and exterior post designs, helping keep the correct handle type on each side. Because the pull is part of the DSI 2000 Series, installers can rely on the same basic mounting concept when working with other handles in this series, which can streamline layout and installation steps from door to door. The specified 304 stainless steel material provides a single, known substrate under the satin finish, which supports predictable drilling and handling characteristics when positioning the handle and tightening set screws on the DSI mounting kits.
The Sugatsune DSI-2000-30-60I door pull has a 23-5/8 inch (600 mm) center to center dimension, so post locations are fixed at that spacing when laying out holes on the door.
The DSI 2000 Series pull uses 304 stainless steel, giving a solid stainless construction for the handle body when mounting it on interior doors.
The DSI interior door handle is finished in satin stainless steel, providing a brushed appearance that coordinates with other satin stainless decorative hardware.
The posts for interior handles have set screws for DSI mounting kits, so the handle secures to the mounting kit by tightening those set screws at each post.
The SAP description notes the DSI interior door handle as 900mm long, giving an extended pull length beyond the 600 mm center to center spacing.
This handle is identified as DSI 2000 Series by Sugatsune America, so it matches the styling and system approach of other DSI 2000 Series components.
The Sugatsune DSI-2000-30-60I satin stainless interior mount door pull combines 304 stainless steel construction, 900 mm length, and 23-5/8 inch (600 mm) center to center spacing for projects that call for a tall, consistent DSI 2000 Series handle. For interiors that already use satin stainless decorative hardware, this DSI interior door handle 900mm long SS offers a coordinated look and a defined mounting interface using set screws with DSI mounting kits.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SLDKIT-5/20 Mfr# DKIT-5/20 | Sugatsune single handle concrete mounting kit for dsi-2000-20-concrete dkit-5/20 | ||||
Sold in: 1 Each | SLDKIT-4/20-1 Mfr# DKIT-4/20-1 | Mounting Kit for DSI Door Handles Kit for DSI-2000-20 - Sugatsune DKIT-4/20-1 |