Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DSI-3020 sliding door pull 150mm long SS describes a surface-mount handle set from the Sugatsune DSI 3020 Series that is designed for sliding doors, so it gives a positive handhold where a flush or small pull will not. The pull measures 5-15/16 inches, or 151 mm long, which provides a generous grip area on the stile, helpful when operating heavier or taller sliding wood doors. The set is sold as a set, which means the components are matched for the same application so the handles and pull work together as one solution. The material is 304 stainless steel, so the pull resists corrosion in typical interior woodworking environments where moisture or fingerprints are common. The satin finish on the stainless steel reduces glare and fingerprints compared with polished metal, which helps the pull maintain a consistent appearance in high-touch areas.
The DSI 3020 Series surface-mount handle layout lets the installer place each handle on the sliding door face without complex mortising, which simplifies preparation on wood doors during shop or onsite work. Because each set includes 2 metal handles, one handle can be installed on each face of the sliding door, so operation from either side uses the same pull profile. The edge-mounted recessed pull in the set is designed for use with wood doors, so it sits at the door edge to give a finger grip where the stile meets the jamb when the door is fully recessed. This combination of surface-mount handles and an edge-mounted recessed pull gives a complete handhold arrangement for sliding wood doors in one matched Sugatsune configuration.
The Sugatsune DSI-3020 Series handle and pull set is described specifically as a DSI-3020 sliding door pull 150mm long SS, so its role centers on sliding door applications where a metal pull is preferred. The 304 stainless steel material supports use on wood doors in residential or shop-built sliding panels where a metal grip is needed instead of a cutout in the stile. Because the edge-mounted recessed pull is specified for wood doors, the set suits sliding wood doors that slide into or past a pocket or wall where only the door edge is exposed. The satin stainless steel finish helps this set visually match other satin stainless hardware on nearby doors, drawers, and decorative hardware and moldings, which is useful when coordinating hardware across a full room or project.
The Sugatsune DSI-3020-150 satin stainless steel pull is part of the DSI 3020 Series, so repeat orders can be referenced by that series name and the manufacturer part DSI-3020-150 for consistent results on multi-door runs. The 5-15/16 inch, or 151 mm length, is a fixed dimension, which allows shop drawings and drilling jigs to be based around that size for repeatable handle placement from door to door. The use of 304 stainless steel supports long-term use in typical woodworking environments, helping the grip surface stay intact even with frequent contact from hands and tools. The satin finish further supports repeatable appearance by softening reflections and helping small marks stand out less across banks of doors. Because the set is sold as a set with 2 metal handles and 1 edge-mounted recessed pull for wood doors, the same combination can be repeated on multiple openings so both faces and the edge of each sliding wood door share the same Sugatsune design language and pull feel.
The DSI-3020-150 pull is described as a sliding door pull with an edge-mounted recessed pull for use with wood doors, so it is oriented to sliding wood door applications.
The Sugatsune DSI-3020-150 satin stainless pull is 5-15/16 inches, or 151 mm long, giving a substantial grip length for operating sliding wood doors.
The DSI 3020 Series sliding door pull uses 304 stainless steel, providing a stainless construction suited to typical interior woodworking and decorative hardware environments.
The DSI-3020-150 sliding door handle set has a satin stainless steel finish, giving a muted metallic look that coordinates with other satin stainless hardware.
The Sugatsune DSI-3020 Series set is sold as a set and each set includes 2 metal handles and 1 edge-mounted recessed pull for use with wood doors.
The manufacturer part number for this sliding door pull is DSI-3020-150, which identifies this specific satin 304 stainless 151 mm long Sugatsune handle and pull set.
The Sugatsune DSI-3020 sliding door pull 150mm long SS set from Wurth Baer Supply combines 2 metal surface-mount handles and 1 edge-mounted recessed pull for wood doors, so one part number covers both door faces and the door edge. With 304 stainless steel construction and a satin finish, the 151 mm long pulls support sliding wood door projects where a consistent stainless appearance and a solid grip are required. Use the DSI-3020-150 designation when planning or ordering so this specific Sugatsune handle and pull set can be matched across multiple sliding door openings.