DSI-3250 Series sliding door handle describes a contemporary handle from Sugatsune America that is designed for sliding and pocket doors where a low-profile pull is needed. The handle can be accessed from the door front, back, or edge, so one part serves multiple grasp points around the door and supports flexible door operation in tighter clearances. The DSI-3250 pocket door pull is 1-3/8 inch long, giving a compact grip area that suits smaller door edges or narrow stile designs while still defining a clear handhold. Material options listed for the DSI 3250 Series are 304 stainless steel or brass, which positions this handle for projects needing either stainless or brass construction in a consistent contemporary style. The finish options specified as satin or black allow the installer to align the visual look with surrounding decorative hardware and moldings.
The web description states that this handle requires adhesive for installation, using a product such as 2-part epoxy, so the pull is intended to be bonded rather than mechanically fastened into the door. That adhesive-mounted approach keeps the contemporary look free of visible fasteners, which supports a clean aesthetic on both faces and the edge of the door. The note that a 2-part epoxy is cited as an example highlights that a strong bonding method is expected, helping the handle stay secure under repeated sliding cycles. Because access is from the front, back, or edge, installers can plan the bonding locations around those three faces, aligning the pull where users naturally reach while still following the adhesive-focused mounting approach.
The SAP description identifies this product as a DSI-3250 pocket door pull, so it is targeted at pocket or sliding door setups where the pull needs to sit within the door profile. The category listing under decorative hardware and moldings, handles and pulls, places it with other visible door pulls, making it suitable for finished residential or commercial openings where hardware appearance is part of the design. Being tagged as part of the Sugatsune handles and pulls product class connects it with other Sugatsune sliding door hardware, which helps keep an installation visually unified across multiple doors on the same project. The DSI-3250 Series name further signals that this pull belongs to a defined series, so specifiers can call out the same family for repeat jobs and expect a consistent contemporary style and material options.
The ability to access the handle from the door front, back, or edge directly supports user interaction, since the pull offers a contact point wherever the hand approaches, reducing awkward grasping on pocket door installations. The 1-3/8 inch length gives a compact size that is helpful on narrow stile pocket doors, where a longer pull might conflict with surrounding trim or adjacent doors. Material options of 304 stainless steel or brass contribute to long-term hardware alignment across a job, because the same base metals can be repeated on other handles and pulls for a consistent hardware specification. Satin and black finishes allow installers to mirror common finish palettes in decorative hardware and moldings, helping this pull blend with hinges, knobs, and other visible fittings. The adhesive-based installation approach allows the handle to present a smooth, uninterrupted surface to the user, supporting the contemporary design intent during everyday door operation.
The DSI-3250 pocket door pull is identified for pocket and sliding door use, so it suits doors that slide into or along a wall where a recessed-style pull is required.
The handle requires adhesive for installation, with a product such as 2-part epoxy cited, so the pull is bonded to the door surface instead of being mechanically fastened.
The handle design can be accessed from the door front, back, or edge, giving users a grasp point from either side of the door and along the edge during sliding movement.
The DSI-3250 Series sliding door handle is specified as 1-3/8 inch long, which suits narrow pocket door stiles or tight jamb conditions where space for a pull is limited.
The DSI 3250 Series is listed with material options of 304 stainless steel or brass, letting projects align the pull with other stainless or brass decorative hardware.
The web description specifies satin or black finishes, allowing the pull to coordinate visually with surrounding handles and pulls in similar finish tones.
The DSI-3250 Series sliding door handle from Sugatsune America combines a contemporary profile with access from the front, back, or edge of the door, so it adapts well to pocket and sliding layouts where users approach from different sides. The 1-3/8 inch length, together with 304 stainless steel or brass material options and satin or black finishes, lets you match existing decorative hardware while staying within tight door clearances. With adhesive-based installation noted in the description, this pull supports clean-lined sliding door projects that call for a compact, modern handle solution.