Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DSI-3250 pocket door pull describes a Sugatsune America handle from the DSI 3250 Series that delivers a contemporary handle design, so it suits modern cabinetry and pocket door projects where clean lines matter. The pull has a 3-15/16 inch diameter, which creates a defined grip area sized for comfortable hand access on interior doors. The SAP description identifies this model as a pocket door pull for 1-3/8 inch applications, tying the pull to a common interior door thickness used in many residential and light commercial jobs. The pull can be accessed from the door front, back, or edge, which lets you operate the same hardware from multiple faces of a sliding or pocket door without changing parts. That three-way access supports straightforward operation when the door is recessed, partially open, or flush with surrounding panels.
The web description states that this DSI-3250 Series pull requires adhesive for installation, such as 2-part epoxy, so the pull is designed to bond to the door surface rather than rely on a mechanical fastener pattern. That adhesive-based approach allows the handle to sit cleanly on the door without visible fastener heads interrupting the contemporary design. The reference to 2-part epoxy points toward a structural bonding method, supporting a secure attachment when the door is operated repeatedly. Because the pull can be accessed from door front, back, or edge, the adhesive installation needs to position the pull where all three access points remain usable in the finished opening.
The SAP description identifies the product as a pocket door pull for 1-3/8 inch doors, which aligns it with standard interior pocket door slabs in many woodworking projects. The classification under Decorative Hardware & Moldings and Handles and Pulls places it with visible hardware elements, so it is suited to installations where the pull contributes to the finished look of the door face. Being part of the DSI 3250 Series from Sugatsune America ties this pull to a product family that targets contemporary handle design, making it appropriate for modern cabinetry walls and sliding room dividers. The ability to access the handle from the front, back, or edge of the door means it works well on doors that travel deeply into a pocket, because users can catch the door from whichever surface is most exposed.
The 3-15/16 inch diameter gives you a fixed measurement for layout, so cutouts or mortises can be repeated consistently across multiple pocket doors without guesswork. The material listed as 304 stainless steel or brass provides a choice between two established decorative hardware materials, supporting alignment with other components specified on the same project. Finish options of satin, black, or antique brass allow the installer or fabricator to coordinate the pull with surrounding hardware, reducing visual mismatch on high-visibility doors. The adhesive requirement, with a reference to 2-part epoxy, defines the installation method so bonding strength can be planned around typical loads on a sliding door. Because the handle can be accessed from the front, back, or edge, that single component can serve several grasping positions, reducing the number of different pulls needed on a multi-door wall.
The DSI-3250-35-AB is identified in the SAP description as a pocket door pull for 1-3/8 inch doors, aligning it with common interior pocket door thicknesses.
The web description states that the pull requires adhesive for installation, such as 2-part epoxy, so it is bonded to the door surface rather than fastened mechanically.
The product description notes that the contemporary handle design can be accessed from the door front, back, or edge, allowing use from multiple orientations.
The product name specifies a 3-15/16 inch diameter, which defines the circular footprint of the pull on the door surface.
The web description lists the DSI 3250 Series as using 304 stainless steel or brass, giving two material options within this product family.
The web description states that finishes are satin, black, or antique brass, supporting coordination with other decorative hardware finishes on the project.
This Sugatsune America DSI-3250-35-AB pull combines a contemporary handle design with a 3-15/16 inch diameter and adhesive installation, giving you a defined layout and a clean surface appearance on 1-3/8 inch pocket doors. The option of 304 stainless steel or brass in satin, black, or antique brass finishes lets you align the pull with surrounding decorative hardware. For pocket door work where front, back, or edge access is valuable, this DSI 3250 Series pull offers a single, consistent solution.
Sold In: 1 Each