Sugatsune DSI-3310 Series 9-7/8" (250 mm) Center to Center Satin Stainless Steel Exterior Mount Door Pull, - DSI-3310-30-25E

DSI-3310 Exterior Door Handle For Clean Pulls

DSI-3310 exterior door handle describes this Sugatsune DSI-3310 Series door pull designed as an exterior mount handle in satin stainless steel. The handle uses a 250 mm center to center post spacing, which helps align with common door drilling patterns on architectural and cabinet projects. The handle is built from 304 stainless steel, so it provides stainless material performance in typical interior or exterior environments where corrosion resistance and a clean, modern look are important. The satin stainless finish diffuses reflections on the pull surface, helping doors read cleanly while still matching other stainless components in the assembly. This DSI-3310 Series pull works with DSI mounting kits, tying the handle into a defined mounting system for consistent installation. Posts for exterior handles are threaded to accept screws, providing a direct mechanical connection into the door structure during mounting.

Key DSI-3310 Handle Details For Projects

• The 250 mm center to center spacing sets the post locations, simplifying layout when drilling doors or matching existing bore patterns on new or retrofit work.
• Material listed as 304 stainless steel provides a stainless base metal that supports use on interior or exterior doors in typical woodworking and architectural applications.
• The satin stainless steel finish gives the pull a low-glare stainless appearance that coordinates with other satin stainless hardware across the project.
• Exterior type posts are threaded to accept screws, creating a positive mechanical attachment into the door face during installation work.
• Interior type posts use set screws with DSI mounting kits, so the interior side of a through-bolted assembly locks to the kit hardware rather than relying on wood threads.
• Designated for use with DSI mounting kits, the pull integrates into the DSI system where the handle and mounting kit are specified together for consistent installation.

Mounting Layout And Door Pull Installation Use

This Sugatsune DSI-3310 Series 304 stainless steel door pull installs on doors using a 250 mm center to center post layout, which provides a fixed drilling dimension when planning new doors or aligning with existing holes. As an exterior mount handle, the posts for exterior handles are threaded to accept screws, so installers drive screws directly into the threaded posts from the door side specified for exterior mounting. On the interior side, posts for interior handles have set screws for DSI mounting kits, so the interior handle secures to the mounting kit shaft, locking the pull to the door assembly. Using the satin stainless steel DSI-3310 pull with DSI mounting kits keeps the visible hardware limited to the handle itself while the mounting components work behind the scenes.

How This Sugatsune Door Pull Works In Practice

Stainless Door Pull For Interior Or Exterior

The DSI-3310 Series door pull made from 304 stainless steel serves interior or exterior type applications where a stainless handle is specified in woodworking or architectural projects. The satin stainless steel finish offers a uniform appearance that coordinates with other stainless or satin-finished hinges, locks, or trim on the same door, so the hardware set reads as one system. With a 250 mm center to center dimension, the pull spans the door face with a proportion suited to medium-length pulls, creating a comfortable hand grip zone without overpowering typical cabinet or door stiles. Because the product is identified as an exterior mount door pull, it fits roles where the handle must sit proudly on the door surface and remain easy to grasp in regular traffic. The DSI-3310 Series classification links this pull to other DSI-3310 components, which helps specifiers keep hardware families consistent across multiple openings.

Mounting System Details That Support Repeatable Results

This Sugatsune DSI-3310 exterior mount door pull uses posts for exterior handles that are threaded to accept screws, so the installer gains a direct metal-to-metal thread engagement when fastening into the pull. That threaded interface helps the handle seat firmly against the door once the screws are tightened to the specified torque. On the other side of the assembly, posts for interior handles have set screws for DSI mounting kits, letting the pull clamp onto the kit shaft for a fixed, non-rotating connection. Using DSI mounting kits with this door pull creates a defined hardware stack from exterior handle, through the door, to interior handle, which helps maintain alignment of both pulls over time. The 250 mm center to center spacing becomes the controlling dimension for drill points, so jigs and templates can be set to that distance for repeatable preparation across multiple doors.

Practical Questions About This DSI-3310 Door Pull

Select This Handle For Stainless Door Projects

The Sugatsune DSI-3310 Series satin stainless steel exterior mount door pull combines 304 stainless steel construction, a 250 mm center to center post layout, and defined mounting behavior with DSI mounting kits. That combination gives woodworking and architectural trades a clearly specified stainless handle option when a DSI-3310 exterior door handle is required on interior or exterior openings. For projects calling for a satin stainless look with threaded exterior posts and set screw interior posts, this DSI-3310-30-25E model provides a consistent hardware choice across multiple doors.