Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DSI-3310 exterior door handle identifies this pull as part of Sugatsune Americas DSI 3310 Series, so it matches that line when you need consistent hardware across a project. The handle uses a 300 mm center to center post spacing, which sets hole locations for straightforward layout on doors built to metric spacing. Material is 304 stainless steel, which provides a solid-feeling pull surface and helps the handle perform in typical interior or exterior door environments. The satin stainless steel finish gives a low-glare appearance, which helps fingerprints stand out less and keeps doors looking presentable in regular traffic. This pull is described as an exterior mount door pull, which means it is intended to sit proud on the door face and be grasped from the outside rather than recessed into the stile.
This DSI 3310 Series door pull is specified with posts for exterior handles that are threaded to accept screws, so the exterior side is secured by machine-thread engagement rather than press fit. Interior handles in the same arrangement use posts with set screws for DSI mounting kits, which means the interior side grips the mounting hardware mechanically without relying on adhesives. The product is designated as an exterior mount door pull, so the working geometry is based on standoff posts rather than concealed cups, influencing the way you plan door clearances and hand clearance around the stile.
The DSI 3310 Series material specification of 304 stainless steel supports use on both interior and exterior type doors, so the same pull can be used at passage doors, utility rooms, or exterior service entries that suit this style. The 300 mm center to center measurement aligns with metric hardware layouts, which works well on European-influenced cabinetry, architectural doors, or custom metal frames laid out in millimeters. The satin stainless steel finish coordinates with other satin stainless components, so it helps keep a consistent look across hinges, locks, and other visible hardware on the project. Because the handle is identified as an exterior mount door pull, it is suited to applications where a proud, easy-to-grab pull is preferred over a flush solution on wood, metal, or composite door faces.
Posts for exterior handles are threaded to accept screws, which gives installers a defined fastening method that helps control clamping force through the door skin. This threading allows the pull to be tightened down predictably, helping keep the handle stable over time under repeated use. Posts for interior handles have set screws for DSI mounting kits, which means the interior pull can lock onto the mounting hardware without rotating, supporting cleaner alignment of multiple pulls in a row. Working with a 300 mm center to center dimension lets shops standardize boring templates, which reduces layout time and helps replacement handles from the same DSI 3310 Series land correctly in existing holes. The satin stainless steel finish on 304 stainless steel provides a uniform surface that can be matched across future replacements from the same series, which is useful when doors are repaired or reworked later.
The DSI-3310-30-30E pull has a 300 mm center to center dimension, so hole spacing for the posts follows a 300 mm layout when drilling doors or panels.
The DSI 3310 Series handle uses 304 stainless steel, which provides a metal pull suitable for typical interior or exterior door environments on woodworking or metal projects.
The satin stainless steel finish gives a brushed, low-glare appearance, which helps high-touch doors look uniform and reduces reflected light on entry or passage doors.
Posts for exterior handles are threaded to accept screws, so the exterior side of the pull is secured by screw threads engaging the post during installation.
Interior handles in the DSI arrangement have posts with set screws for DSI mounting kits, so the interior pull locks mechanically to the mounting components.
This Sugatsune DSI 3310 Series product is described as an exterior mount door pull, meaning it is designed as a surface-mounted handle on the door face.
The DSI-3310-30-30E from Sugatsune America ties directly into the DSI 3310 Series, so it suits projects where that specific 300 mm center to center layout and satin 304 stainless steel finish are already established. Using a pull identified for interior and exterior type applications helps standardize hardware across different openings while keeping the same look and post layout. For jobs calling for DSI mounting kits, the defined combination of threaded exterior posts and interior posts with set screws supports a clear fastening approach. When a project spec points to this Sugatsune DSI 3310 Series configuration, selecting this handle matches the required material, finish, and center to center dimension.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SLDKIT-5/15 Mfr# DKIT-5/15 | Sugatsune single handle concrete mounting kit for dsi-3310-15 dkit-5/15 | ||||
Sold in: 1 Each | SLDKIT-4/15-1 Mfr# DKIT-4/15-1 | Mounting Kit for DSI Door Handles Kit for DSI-3310-15 - Sugatsune DKIT-4/15-1 | ||||
Sold in: 1 Each | SLDKIT-2/15-1 Mfr# DKIT-2/15-1 | Sugatsune single handle mounting kit for dsi-3310-15 dkit-2/15-1 |