Pocket Door Handle Stainless Steel 38 mm Wide describes a sliding door pull designed for pocket or sliding doors where a recessed grip is needed. The web description states it has a contemporary handle design, so it suits clean-lined residential or commercial millwork where modern styling is specified. The product information notes that the handle can be accessed from the front, back or edge of door, which allows doors to be operated from either side and from the door edge, useful on pocket doors that retract fully into the wall. This same front, back or edge access supports consistent operation on sliding panels, closet doors or similar applications that match the category Sliding Door Pulls. The SAP description and product name together identify this as the DSI-4251 POCKET DOOR PULL 38MM WIDE SS, giving installers a clear reference when matching hardware schedules or reordering from drawings.
The web description clearly states that this pocket door pull requires adhesive for installation, defining the basic mounting approach for the hardware. It further specifies that polyurethane glue or 2 part epoxy are examples of suitable adhesives, so installers can plan for a structural bonding method rather than mechanical fastening. The note that adhesive is not supplied signals that the adhesive selection and quantity are part of project planning for the installer or shop. Because the handle can be accessed from front, back or edge of door, installation alignment affects usability on both faces and the edge, so careful positioning relative to the 38 mm Wide dimension supports a consistent grip point. The use of 304 Stainless Steel as the material means the bonding surface is stainless, which is relevant when choosing compatible polyurethane glue or 2 part epoxy systems.
The brand is listed as Sugatsune America, placing this pocket door handle within a known sliding door hardware line used by professional installers and serious DIY users. The category Builders Hardware and product class Sliding Door Hardware confirm its role as a functional pull on sliding or pocket doors, rather than decorative trim. The documented ability to access the handle from front, back or edge of door suits pocket doors that recess into walls, since the grip remains reachable even when the door is nearly flush. That same feature benefits sliding door panels in closets or room dividers, where users may approach from either side and occasionally from the door edge. With a 38 mm Wide format, the handle provides a defined gripping zone without occupying excessive stile width, which fits narrow door designs and contemporary millwork where clean lines are important.
The manufacturer part number DSI-4251-38 identifies this specific pocket door pull, supporting repeat orders and alignment with project cut lists that call out DSI-4251 POCKET DOOR PULL 38MM WIDE SS. Since installation requires adhesive such as polyurethane glue or 2 part epoxy, fabricators can rout or prepare the door and schedule bonding operations alongside other glue-up steps for consistent workflow. Knowing that the base material is 304 Stainless Steel allows shops to standardize on adhesives formulated for stainless surfaces, helping achieve uniform bond performance across multiple doors. The satin finish described in the web description coordinates visually with other satin stainless builders hardware, reducing finish mismatch across hinges, locks, and pulls in the same opening. Because the handle design is described as contemporary, designers can specify it confidently across a run of sliding doors, knowing the appearance will support a unified, modern look throughout the project.
The DSI-4251-38 is a pocket door handle in the Sliding Door Pulls category, so it functions as the grasp point for operating sliding or pocket doors within a sliding door hardware system.
The pocket door handle requires adhesive for installation, using a bonding method instead of mechanical fasteners, so door preparation focuses on adhesive surfaces rather than screw locations.
The web description specifies adhesives such as polyurethane glue or 2 part epoxy, guiding installers toward structural adhesive types suitable for securing the handle to the door.
The pocket door handle can be accessed from front, back or edge of door, allowing users to operate the sliding door from either face and from the door edge when needed.
The product name notes the handle is 38 mm Wide, helping installers plan door stile layouts and determine how much face area the pull will occupy on the sliding panel.
This pocket door handle uses 304 Stainless Steel with a satin finish, providing a corrosion-resistant metal and a brushed appearance that coordinates with satin stainless builders hardware.
The Sugatsune America Pocket Door Handle Stainless Steel 38 mm Wide combines a contemporary handle design with front, back or edge of door access, supporting practical operation on pocket and sliding doors. Its 304 Stainless Steel construction with satin finish aligns with common builders hardware standards, giving projects a consistent visual and material specification. Because installation requires adhesive such as polyurethane glue or 2 part epoxy, this pull integrates well into shop or field workflows built around bonding rather than fastening. For sliding door hardware jobs that need a defined 38 mm wide stainless grip and a contemporary look, this DSI-4251-38 pocket door pull is a straightforward choice.