DSI-4253 sliding door pull is a contemporary handle design from Sugatsune America that works on a sliding or pocket-style door surface. The pull can be accessed from the door front, back, or edge, so one part serves multiple grasp points and keeps the door usable from either side during everyday operation. The 35mm wide format gives a defined finger target while staying compact on narrow stile layouts or slim pocket doors. Constructed from 304 stainless steel, the pull offers the corrosion resistance and solid feel associated with this material in typical interior woodworking environments where metal hardware is exposed to touch and routine cleaning. The stainless construction also supports a consistent, contemporary look alongside other stainless components in the project, which helps create a unified appearance across a full bank of sliding or pocket doors.
The DSI-4253 sliding door pull is described as requiring adhesive for installation, such as a 2-part epoxy. This mounting approach keeps the door face free from through-bolts, which supports a clean presentation on thin or detailed panels. Using an adhesive-based method also lets the installer work on fully finished door surfaces, which can streamline workflow when hardware is applied late in the sequence. Because the pull can be accessed from the door front, back, or edge, an adhesive mount allows positioning to suit how the door will actually be used, supporting consistent hand access without altering the door structure.
The DSI-4253 sliding door pull is classified under handles and pulls in decorative hardware and moldings, placing it in the group typically used on sliding or pocket-style doors in cabinetry and architectural millwork. Its contemporary handle design works well where a modern aesthetic is called for, so it can be specified alongside other streamlined hardware in offices, residential built-ins, or commercial interiors. The ability to be accessed from the door front, back, or edge means it can serve both as the main operating pull on the exposed face and as the concealed edge pull when the door is recessed, which is useful when a pocket door must be drawn out from its pocket. The 35mm wide profile also supports use on narrower door rails, where oversized pulls might interfere with clearances or adjacent components.
The DSI-4253 pocket door pull in 304 stainless steel gives installers a consistent material choice that stands up to typical interior use, so repeated contact on a high-use sliding or pocket door does not conflict with the hardware specification. The stainless build supports a uniform look when multiple pulls are used in a run of doors, tying back to other stainless details in the project for visual continuity. Because the pull can be accessed from the door front, back, or edge, layout decisions on the shop floor or at install can prioritize hand access and door travel rather than working around a single-sided grip, reducing the need for later adjustment. The 35mm width offers a predictable reference for aligning pulls across several doors, which helps maintain straight sightlines from panel to panel. The adhesive-based installation requirement, such as with a 2-part epoxy, lets the installer position the pull on fully finished door faces, which can streamline workflow when hardware is applied after finishing and helps protect the integrity of thin or veneered panels.
The DSI-4253 sliding door pull is identified as a pocket door pull, so it suits sliding or pocket-style doors where a recessed or surface-access handle is needed.
The DSI-4253 pocket door pull requires adhesive for installation, such as a 2-part epoxy, which allows mounting on finished door surfaces without through-bolts.
The DSI-4253 sliding door pull can be accessed from the door front, back, or edge, so one pull serves as the grasp point from multiple directions.
The DSI-4253 pocket door pull is specified as 35mm wide, giving a compact footprint that fits narrow stiles or slim sliding door rails.
The DSI-4253 sliding door pull is made from 304 stainless steel, providing corrosion-resistant metal construction suited to interior door and cabinet environments.
The DSI-4253-35 manufacturer part number identifies this exact 35mm wide stainless pull, helping align ordering, documentation, and repeat specifications.
The DSI-4253 sliding door pull from Sugatsune America combines a contemporary handle design with access from the door front, back, or edge, giving one solution for multiple grasp points. Its 35mm wide profile in 304 stainless steel suits sliding and pocket-style doors that call for compact, modern hardware. For woodworking and millwork projects handled through Wurth Baer Supply, this part number DSI-4253-35 offers a clearly defined, repeatable choice when specifying or re-ordering stainless sliding door pulls.