Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DSI-4400 external door handle delivers a 200 mm center-to-center mounting layout on an 8-11/16 inch long by 13/16 inch wide pull, which gives sliding door projects a predictable grip span that lines up with common door and panel proportions. This handle is part of Sugatsune America sliding door hardware, so it fits into a coordinated hardware set on projects where a consistent look is important across multiple openings. The handle is classified as builders hardware in sliding door pulls, positioning it well for residential or light commercial sliding door applications that need a dedicated pull rather than a recessed cup. Its external design suits doors that benefit from a stand-off grip, helping hands clear the door surface during operation and supporting comfortable movement of heavier doors.
This Sugatsune America DSI-4400 external stainless steel door handle is designed for use with DSI mounting kits, so the handle integrates into the DSI system rather than relying on ad-hoc fastener layouts. Exterior handle posts are threaded to accept screws, giving the outer side a direct, positive attachment point that supports load transfer through the door face. Interior handle posts use set screws with the DSI mounting kits, so the inside pull locks to the kit hardware and works as part of a through-bolted assembly. The 200 mm center-to-center spacing keeps both sides aligned when paired with DSI mounting kits, which is useful when matching multiple doors in a sliding system.
This door handle is specified as sliding door hardware in the builders hardware category, so it suits applications where a dedicated pull is needed on a sliding leaf rather than a swinging door. Its 304 stainless steel construction supports use in interior spaces and many sheltered exterior locations, where corrosion resistance and a stable appearance are important over time. The satin stainless steel finish keeps reflections low, which fits well in contemporary cabinet, closet, or room-divider sliding systems that favor subtle hardware. With a similar style to KPH series cabinet handles, this pull helps tie sliding doors visually to adjacent cabinetry that already uses KPH style hardware, creating a cohesive hardware line through the space. The 8-11/16 inch length offers a substantial gripping area, giving users a comfortable hand position when opening wider or heavier sliding panels.
The defined 200 mm center-to-center spacing on the DSI-4400-20-20E handle means installers can standardize drilling jigs for repeated door production, which helps reduce layout errors and speeds up shop or site work. Exterior posts with threaded connections to screws provide a reliable fastening method that withstands repeated pulling forces on the active side of a sliding door, limiting callbacks related to loose pulls. Interior posts that engage DSI mounting kits via set screws allow the handle to clamp tightly to the mounting hardware, so both sides of the pull act as a single assembly through the door thickness. The 13/16 inch width controls projection across the hand contact area, enabling planners to predict how far the hardware will visually register on slim or thick doors. Construction in 304 stainless steel pairs strength with corrosion resistance, supporting long-term function in typical woodworking and architectural environments. The satin stainless finish further helps the handle blend with other brushed stainless components in sliding door systems from Sugatsune America.
The DSI-4400 external door handle is classified as sliding door hardware and sliding door pulls, so it is intended for use on sliding doors requiring a surface-mounted pull.
The 200 mm center-to-center spacing fixes the post locations, allowing installers to use consistent drilling templates and align multiple sliding doors with matching handle layouts.
This Sugatsune America door handle is for use with DSI mounting kits, so it is intended to be mounted as part of the DSI hardware system on sliding doors.
The DSI-4400-20-20E has exterior handle posts that are threaded to accept screws, creating a direct mechanical attachment on the outside face of the door.
The interior handle posts use set screws that engage the DSI mounting kits, so the inside pull clamps to the kit and forms a secure through-door assembly.
This sliding door pull is made from 304 stainless steel with a satin stainless steel finish, providing corrosion resistance and a low-glare appearance on sliding door installations.
The DSI-4400 external door handle combines a fixed 200 mm center-to-center layout with 8-11/16 inch by 13/16 inch proportions, giving sliding door projects a repeatable drilling and visual standard. Its 304 stainless steel construction with satin stainless finish supports durable, low-glare hardware in cabinet, closet, and room-divider applications. Threaded exterior posts and set-screw interior posts designed for DSI mounting kits create a secure assembly that integrates into the broader DSI sliding door system. Specify the Sugatsune America DSI-4400-20-20E handle when a coordinated stainless sliding door pull is needed within a DSI-based installation.