Sugatsune ES-Z001 224mm pull is a dark bronze handle that provides a modern feel, so it supports clean, updated cabinet and furniture layouts in kitchens, baths, and shop builds. The handle uses a center to center dimension of 8-13/16 inches (224 mm), which creates a consistent look across wider drawer fronts where longer pulls keep proportions balanced. Its overall length of 9-13/16 inches (250 mm) gives extra grip area, which helps on heavier drawers or tall doors where users expect a solid handhold. The pull is made from zinc, which delivers a hard, stable body that resists everyday knocks in a busy workspace. A projection of 1-1/4 inches (32 mm) spaces hands away from the door surface, which reduces knuckle contact on thicker fronts. The dark bronze finish sets a deeper tone on the face of the cabinet, which pairs well with both light and dark panel materials.
The ES-Z001 series handle uses a center to center spacing of 8-13/16 inches (224 mm), which directs installers to drill two holes at that fixed distance for accurate mounting. The overall length of 9-13/16 inches (250 mm) means the handle will extend slightly beyond the hole centers, which affects how close it can sit to cabinet edges or neighboring fronts. With a projection of 1-1/4 inches (32 mm), the pull stands off the face of the cabinet enough to clear common door thicknesses, which helps when aligning multiple pulls on adjacent doors so they do not visually crowd the panel face. The 5/16 inch (8 mm) width keeps the contact line narrow, which can be helpful when aligning the handle parallel to door edges because the straight sides act as a visual reference.
This Sugatsune America handle belongs to the ES-Z001 series and sits in the Handles and Pulls category, which suits it to cabinet doors, drawer fronts, and similar furniture panels. The dark bronze finish with a modern feel works well on decorative hardware layouts where the pull doubles as a design element, so it supports projects that need a coordinated look from kitchen runs to built-in storage. Its length of 9-13/16 inches (250 mm) and 224 mm center to center dimension align with wider drawer faces, which makes it appropriate for lower base cabinets that benefit from a longer grip. The slim 5/16 inch (8 mm) width keeps the pull visually light, which helps on smaller doors where a bulky handle might dominate the panel.
The ES-Z001-224/DB model is smooth to the touch, which provides a comfortable hand feel during repeated opening and closing throughout the day. That smooth surface reduces catching points along the handle, which matters when users slide their hands along the length on wide drawers. The zinc material gives the handle a solid, unified body, which supports predictable performance when mounted in rows where each pull sees similar load. A projection of 1-1/4 inches (32 mm) standardizes the stand-off from the door face, which keeps lines even when this pull is repeated across upper and lower cabinets. The 224 mm center to center spacing establishes a precise drilling reference, which supports accurate jig setup for installers who run multiple fronts on the same project. Positioned in the Decorative Hardware & Moldings group, this handle ties hardware function and appearance together on finished cabinetry.
The ES-Z001-224/DB pull has a center to center dimension of 8-13/16 inches (224 mm), which sets the drilling distance for the mounting holes on doors or drawers.
The handle length is 9-13/16 inches (250 mm), which provides extended grip area across wider drawer or door fronts.
The ES-Z001-224/DB pull is made from zinc, which creates a rigid body suited to regular cabinet and furniture use.
The pull projects 1-1/4 inches (32 mm) from the mounting surface, which provides finger clearance between the handle and the cabinet face.
The ES-Z001 series handle is 5/16 inch (8 mm) wide, which keeps a slim profile while still offering enough edge for a secure grip.
The pull is dark bronze with a modern feel, which supports contemporary cabinet designs that call for deeper, understated hardware tones.
The Sugatsune ES-Z001-224/DB handle combines a 224 mm center to center layout, 9-13/16 inch overall length, and 1-1/4 inch projection, so it aligns well with modern cabinet runs that need consistent drilling and comfortable clearance. Its zinc construction and slim 5/16 inch width balance solid handling with a minimal profile, while the dark bronze finish supports contemporary decorative hardware choices. For projects where the pull needs to function as both a working grip and a visual line across multiple fronts, this ES-Z001 series cabinet pull from Wurth Baer Supply offers a straightforward, repeatable option.