Sugatsune TMH Series 160mm pull gives you a decorative handle sized for a 160 mm center-to-center layout, so it drops onto standard drilling patterns for many cabinet and drawer fronts. The pull body is made from brass, providing a solid metal feel that suits higher-end casework where a firm grip and consistent appearance matter. Its finish uses 24K gold plating on the body, so the visible surface presents a gold-toned look that supports upscale residential or commercial millwork. A black nickel finish on the ring creates a dark contrast detail, adding a defined visual break between grip and trim that helps the pull stand out on painted, stained, or laminated fronts. Overall length of 6-5/16 inches offers a comfortable hand span, supporting both one-hand and two-finger operation on doors and drawers in regular use.
The TMH-160 cabinet pull is drilled on a 160 mm center-to-center pattern, so installers can plan boring locations precisely when laying out new fronts or matching jigs already set for 160 mm hardware. Its overall width of 11/16 inch keeps the bar slim, allowing placement on narrower rails or next to other components without overcrowding the face. A projection of 1-7/8 inch moves the gripping surface away from the door or drawer front, giving space for fingers to wrap behind during pulling. This projection also keeps the pull from sticking excessively into walkways, helping maintain clearance around base cabinets and tall units in tighter installations.
The TMH-160 brass pull suits applications that use a 160 mm center-to-center boring, such as many cabinet doors and wider drawers laid out on European-pattern hardware grids. With an overall 6-5/16 inch span, the handle bridges larger drawer fronts or taller doors without looking undersized, which helps keep proportions balanced on pantry units and base cabinets. The 11/16 inch width allows the pull to sit neatly on narrow rails or face frames where space across the front is limited, so it works on smaller doors or compact furniture pieces using the same bore spacing. A 1-7/8 inch projection establishes a stable gripping zone that remains easy to reach, supporting frequent operation on high-use kitchen, bath, or office cabinetry where constant opening and closing happens.
The defined 160 mm center-to-center measurement on the TMH-160 lets tradespeople rely on a repeatable drilling distance, which streamlines jig setup and speeds large cabinet runs where every handle must align across multiple fronts. Brass construction in the pull body provides a dense metal base for the 24K gold plating, helping the finish present as a continuous surface along edges and faces when grouped in banks of doors or drawers. The contrast between the 24K gold plated body and the black nickel ring helps visually position the pull, giving a clear reference line that can be aligned with rails, stiles, or design details. The 1-7/8 inch projection and 11/16 inch width work together to create a comfortable grip depth while maintaining a slim face profile, which supports clean sightlines along continuous cabinet runs and furniture pieces while still providing room for fingers to pull without contact against the door or drawer front.
The TMH-160 pull has a 160 mm center-to-center size, so drill holes can be laid out on this spacing for consistent alignment across multiple cabinet fronts.
The TMH Series 160mm pull has a width of 11/16 inch, allowing it to sit neatly on narrow rails or smaller drawer fronts without overwhelming the fascia.
The TMH-160 pull projects 1-7/8 inch from the mounting surface, creating space behind the handle for fingers while keeping the profile relatively low.
The TMH Series pull body is brass with 24K gold plating on the body and a black nickel finish on the ring, giving a metal construction with contrasting decorative surfaces.
The TMH-160 pull is specified for M5 x 45 mm screws, so mounting holes in cabinet fronts can be prepared to suit M5 machine screw hardware.
The manufacturer part number is TMH-160, which identifies this specific 160 mm center-to-center brass pull when coordinating orders or project documentation.
The Sugatsune TMH Series 160mm pull combines a brass body, 24K gold plated finish, and a black nickel ring detail in a 6-5/16 inch overall length sized for 160 mm centers. With 11/16 inch width and 1-7/8 inch projection, it suits cabinet and drawer fronts laid out on 160 mm boring patterns where a decorative metal pull with clear grip clearance and defined visual contrast supports both daily use and consistent alignment across a run.