Sugatsune TMH Series pull gives you a 192 mm center to center grip, so it matches layouts designed around this common drilling pattern and keeps multiple doors and drawers visually aligned. The brass construction provides a solid handle body, which supports consistent feel when operating heavier cabinet fronts. A 24K gold plating on the body creates a distinct visual accent, helping this pull stand out on feature cabinets or focal drawers. The contrasting black nickel ring adds a defined edge to the design, giving installers a clear transition line against the cabinet surface that helps with visual alignment. With a projection of 1-7/8 inches, the pull sets hands comfortably away from the face of the door, reducing knuckle contact on deeper profiles. The 11/16 inch width keeps the look streamlined while still offering enough surface for a confident grip. Manufacturer part TMH-192 ties this specific size and finish combination to repeat orders.
The TMH-192 uses a 192 mm center to center spacing, so hole drilling aligns with this fixed metric dimension on cabinet doors and drawers. The pull mounts using M5 x 45 mm screw threads, which suits many cabinet door thicknesses built around standard construction. With its 1-7/8 inch projection, the handle stands off the surface enough to clear typical door profiles and edge details. The 11/16 inch width keeps the pull compact, which helps when laying out hardware on narrower drawer fronts or frame members. This model is identified as TMH-192 within the TMH Series, linking this specific length and finish set to design documents or hardware schedules. A base plate identified as SLTMH-M35 is available separately when a project design calls for an added mounting detail behind the pull.
The TMH-192 pull from Sugatsune America, part of the TMH Series, fits cabinet layouts that specify a 192 mm center to center handle spacing, so it works cleanly on wide doors or larger drawers built around this measurement. The brass material supports applications where a solid-feeling handle is needed, such as pantry doors or frequently used storage. With a body finished in 24K gold plating, the pull suits projects where hardware doubles as a visual feature, like accent cabinets or statement kitchen runs. The contrasting black nickel ring frames the pull against the cabinet surface, giving a defined outline that reads well on both light and dark finishes. Its 11/16 inch width allows you to position the pull on narrower rails or stiles without crowding, which is useful on furniture-style cabinets. The 1-7/8 inch projection also gives adequate hand clearance on thicker decorative door fronts.
The fixed 192 mm center to center dimension on the TMH-192 pull supports repeatable drilling patterns, so rows of doors and drawers maintain consistent alignment across a run. M5 x 45 mm screw sizing matches a common metric cabinet fastener standard, which streamlines hardware selection when coordinating multiple pulls in the same space. Because the pull body is brass with 24K gold plating, installers can tie this exact finish to other brass-based components specified on the job. The black nickel ring around the pull acts as a visual boundary, helping you sight level and symmetry against cabinet edges during final adjustment. With a projection of 1-7/8 inches, the handle provides predictable clearance from the mounting surface, which helps when verifying that doors can swing without hands sliding against adjacent fronts. The TMH-192 designation in the TMH Series anchors this combination of length, finish, and dimensions for future matching or expansion.
The TMH-192 pull has a 192 mm center to center measurement, which aligns with drilling layouts designed for this metric spacing on cabinet doors and drawers.
The TMH Series pull uses a brass body with 24K gold plating on the body and a black nickel finish on the ring, combining solid construction with a two-tone visual effect.
The Sugatsune TMH Series pull projects 1-7/8 inches from the mounting surface, giving space for fingers behind the handle during normal cabinet operation.
The TMH-192 handle is 11/16 inch wide, which keeps the pull visually slim while still providing usable gripping surface on doors and drawers.
The TMH-192 Sugatsune pull is designed for M5 x 45 mm screw sizing, matching a common metric fastener standard for cabinet hardware installation.
The TMH Series pull TMH-192 has a base plate option identified as SLTMH-M35 available separately for projects that specify an added mounting detail.
The Sugatsune TMH Series pull in the TMH-192 size brings a 192 mm center to center layout, 24K gold plated brass body, and black nickel ring into one defined hardware choice. Those dimensions, finishes, and the 1-7/8 inch projection give you a clear specification when planning cabinet runs that need a consistent metric drilling pattern and a distinct visual statement. For projects calling for this exact combination of brass construction, gold body, and contrasting ring detail, the TMH-192 provides a precise handle option to match design documents and hardware schedules.
Sold In: 1 Each