Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pocket Door Handle Stainless Steel 35 mm Wide describes a sliding door pull designed for pocket doors in residential or commercial woodworking projects. The handle is part of sliding door hardware, so it serves as the grasp point that lets users open or close a pocket door smoothly from normal reach positions. The contemporary handle design allows access from the front, back, or edge of the pocket door, which means the pull can be operated even when the door is partially recessed or approached from different sides. That multi-direction access matters when doors are set into tight walls or framed passages, because it keeps operation consistent without awkward hand positions. The material is 304 stainless steel, which provides a corrosion-resistant base metal suited to typical indoor environments where humidity or fingerprints are common. The satin stainless steel finish gives a muted appearance that reduces glare, so it visually blends with many modern hardware styles while staying easy to keep presentable in daily use.
This pocket door pull requires adhesive for installation, with polyurethane glue or 2 part epoxy cited as examples, so the handle is intended to be bonded directly to the door surface rather than mechanically fastened. That adhesive-based approach matters when working with finished pocket doors, because it allows installers to attach the pull without drilling through the door face, which helps preserve veneers and laminates. The product description highlights that adhesive is required, so installation planning centers on preparing a clean bonding area sized for the 35 mm wide handle. Using an adhesive method lets the installer position the pull at a precise height that matches other hardware on adjacent doors, supporting consistent alignment across a bank of openings. Because the pull mounts with adhesive, it can also be applied on suitable door edges to take advantage of the front, back, or edge access described for this handle design.
The handle is described as a pocket door pull, placing it specifically in sliding door applications where the door retracts into a wall pocket. That role means it is intended for doors that need a low-profile grip that will not interfere with the door sliding fully into the cavity. The 35 mm wide description gives a sense of the handle footprint on the door, which helps align it with stile widths or rail layouts on typical pocket doors. Because it can be accessed from the front, back, or edge of the pocket door, the pull suits openings where users might reach in from a hallway, room side, or partially concealed edge. That flexibility is valuable in narrow corridors or cabinetry-style installations, since the door can be pulled out or pushed back from the most convenient side. The sliding door hardware classification ties it to projects using track systems where a flush-acting pull is preferred over a projecting knob.
The Sugatsune America branding places this product within a recognized sliding door hardware line, which supports consistent styling when matching pulls to other components in the same project. The satin 304 stainless steel construction provides a durable surface that tolerates frequent hand contact, so the pull continues to operate smoothly in busy spaces such as kitchens, offices, or shared living areas. Since the handle can be operated from the front, back, or edge, users can control the pocket door without hunting for a single approach side, reducing fumbling at doorways. The adhesive mounting requirement focuses installation on creating a solid bond area behind the 35 mm wide pull, so once placed, the handle transmits pulling and sliding forces directly through the bonded surface. That installation style is useful where interior design calls for a clean door face, since the pull functions without exposed fasteners while still providing a defined grip point along the door movement path.
The Pocket Door Handle Stainless Steel 35 mm Wide is described as a pocket door pull in sliding door hardware, so it is intended for use on sliding pocket doors that retract into a wall or cavity.
The handle requires adhesive for installation, with polyurethane glue or 2 part epoxy given as examples, so it is bonded to the door surface rather than fixed with mechanical fasteners through the face.
The contemporary handle design is described as accessible from the front, back, or edge of the pocket door, so it can be operated from multiple sides and positions around the door opening.
The pocket door pull uses 304 stainless steel with a satin stainless steel finish, providing a corrosion-resistant base metal and a muted surface appearance suited to contemporary interior hardware schemes.
The 35 mm wide description indicates the width of the handle contact area on the pocket door, helping installers plan placement relative to door stile dimensions and available flat bonding surface.
The pocket door handle is identified under the Sugatsune America brand with manufacturer part number DSI-4257-35, aligning it with Sugatsune sliding door hardware offerings.
The Pocket Door Handle Stainless Steel 35 mm Wide combines a contemporary pull design with front, back, and edge access, so it supports straightforward operation in tight pocket door openings. Its adhesive-based installation using polyurethane glue or 2 part epoxy suits finished doors where through-holes are undesirable, letting the handle sit cleanly on the surface. With 304 stainless steel construction in a satin stainless steel finish, the pull fits projects that call for corrosion-resistant sliding door hardware with a modern appearance. For pocket door work where a 35 mm wide, adhesive-mounted stainless pull matches the layout, this handle offers a focused solution for smooth, repeatable door movement.