T605 60W Equiline Power Supply with Mounting Block, 7", Black

60W Equiline Power Supply For 12V Lighting Runs

60W Equiline power supply describes a 12 volt DC, 60 watt driver from Tresco Lighting that feeds Equiline lighting runs, so installers can plan low-voltage loads around a clearly defined power capacity on each circuit. This driver sits in Tresco's Drivers product class, which positions it specifically for lighting applications where a dedicated transformer is required to convert to 12 volt DC. The black finish offers a neutral, concealed-look option when mounting in cabinetry or millwork where appearances still matter on open runs. The 60 watt rating supports lighting layouts that stay within that load, which helps organize runs by zone and keep power distribution straightforward on shop drawings. Being part of the Equiline line aligns it with Tresco's matching fixtures, cables, and switches, which supports consistent system design in both new installations and retrofits.

Key Equiline Driver Details For Project Planning

• The driver output is 12 volt DC at 60 watts, which defines how much low-voltage lighting load can be assigned to this unit and helps prevent overloading a given run during layout.
• The power supply is identified as an Equiline unit, which ties it directly to Tresco Equiline lighting components and simplifies pairing fixtures and drivers from the same line.
• The product is classified under Drivers for lighting, which confirms its role as the transformer in the circuit rather than a standalone fixture, streamlining how it is specified on cabinet or display drawings.
• The unit is finished in black, which helps it visually disappear when mounted inside darker cabinets or casework where exposed components would otherwise stand out.
• The manufacturer part number L-DC-EQ60-1 provides a precise reference for reorders or matching existing installations, which reduces ordering mistakes when multiple driver types are used in one shop.

Mounting And Dimmer-Side Details For This Driver

The T605 60W Equiline power supply has a mounting block identified in the name, which gives installers a defined point for securing the driver to a surface so it stays put during service life. The 7 inch reference in the product name indicates a length dimension for the assembly, which helps with laying out space in cabinets, valances, or display bases where room for a driver is limited. The unit is described as dimmable on the 12 volt side using a trailing edge control, so dimming takes place after transformation in the low-voltage run, which matters when matching it with appropriate dimmer hardware and fixture behavior. The 6 port block detail defines how many low-voltage outputs can be organized from this power source, making it easier to allocate fixtures across ports in a structured way.

Using This 60W Driver In Tresco Lighting Systems

Where This 12 Volt DC Driver Fits Best

The Tresco Lighting 12 volt DC 60 watt driver is tailored for low-voltage lighting circuits that need a dedicated power unit between line voltage and fixtures. Its classification as a lighting driver underlines that it is intended to feed Tresco fixtures rather than general electronics, giving cabinet shops and installers a focused option for undercabinet, display, or casework lighting designs that use Tresco systems. The 6 port block provides defined connection points for multiple low-voltage leads, which helps organize wiring inside cabinets and keeps each run traceable for service or later adjustments. By tying directly into Equiline components, the driver supports projects where the entire lighting chain is specified from the same Tresco family, which streamlines both layout and documentation across multiple jobs.

Why These Equiline Details Support Repeatable Installs

The 60 watt capacity of this Equiline power supply gives installers a simple numerical limit for calculating fixture counts per driver, which supports repeatable layouts across similar cabinet runs without revisiting load math on every install. Dimming on the trailing edge of the 12 volt side defines how the driver interacts with dimming controls, which matters for achieving consistent light levels and smooth operation when using dimmable Tresco fixtures on different projects. The black 7 inch assembly with a mounting block is sized and finished for typical cabinet and furniture cavities, so it slots into common shop-built spaces without reworking existing carcass designs. The specific part number L-DC-EQ60-1 anchors all these details to one catalog line, helping shops standardize on a single driver specification across multiple crews and work orders.

Common Questions About This Tresco Lighting Driver

Select This Driver For Matching Equiline Systems

The T605 60W Equiline power supply with 6 port block, mounting block, and power cord is positioned by Tresco Lighting as the 12 volt DC, 60 watt driver for Equiline circuits. Its trailing edge dimmable design on the 12 volt side and black 7 inch form factor support cabinet, display, and millwork applications where wiring, dimming, and placement must align with Tresco fixtures, transformers, power cables, connecting cables, and switches. For projects built around Tresco Equiline components, this L-DC-EQ60-1 driver provides a consistent, documented power source to specify and repeat across jobs.