
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune swivel caster with a 2 inch polyamide wheel and threaded stem mount gives carts or fixtures a compact, maneuverable wheel that turns easily under load. The ball-bearing type caster design supports exceptionally smooth movement, so the caster tracks cleanly when equipment is pushed or repositioned in tight spaces. A load capacity of 176 lb allows one PLN50N10CR caster to carry significant weight, which helps when supporting heavier fixtures by distributing the load across multiple casters. The wheel material is polyamide, providing a hard, consistent rolling surface that helps equipment move predictably over firm floors. The caster is the swivel type with no brake, so it rotates freely for quick changes of direction without a locking step. This threaded stem mount caster sits in the Builders Hardware stem mounted casters category, giving shop builders and installers a compact wheel solution where a stem connection is preferred.
The threaded stem mount on this Sugatsune America caster establishes a defined threaded interface, so installers can match it to a pre-threaded boss or socket when designing carts, fixtures, or cabinets on wheels. Because it is a swivel caster with no brake, the stem mount carries the load while the top plate of the caster turns, allowing the wheel to pivot smoothly as the equipment is steered. The 2 inch wheel diameter keeps the turning radius compact, which is useful when positioning furniture, cabinets, or small equipment in confined shop areas. The ball-bearing type caster design further supports precise movement, translating rotational input at the handle or cabinet edge into clean directional changes at the wheel. As part of a stem mounted casters lineup, this threaded stem configuration lets fabricators standardize on a single mounting method across multiple pieces.
This PLN50N10CR caster from Sugatsune America is a swivel type with a 2 inch polyamide wheel, so it suits compact furniture, cabinets, and light equipment that need frequent repositioning without altering overall height too much. The hard polyamide wheel offers a consistent rolling contact patch, helping carts or cabinets move with predictable resistance over firm floors commonly found in woodworking or assembly areas. Because the caster has no brake, it supports continuous movement where locking is not required, such as under work carts that are regularly shifted along a work line. The 176 lb capacity allows each caster to share a meaningful portion of the total load, so using multiple units under a fixture spreads the weight across the rolling points. In Builders Hardware terms, its place in stem mounted casters helps align it with installations where threaded mounting is already designed into the base.
The threaded stem mount product class defines how this caster engages with the structure, guiding designers to prepare a threaded receiver that holds the stem straight for reliable vertical load support. The ball-bearing type caster construction lets the swivel action remain smooth under rated load, supporting repeatable steering response when equipment is moved many times during a project day. The 2 inch wheel diameter and polyamide material combine to keep rolling resistance predictable, which helps operators judge the force needed to start and stop motion. As a threaded stem swivel caster, the rotating motion occurs above the wheel, so the tread tracks a curved path smoothly when the handle is turned. The 176 lb load capacity, when used in planning caster count, helps projects stay within design limits so that rolling performance stays consistent across multiple fixtures using this same PLN50N10CR caster.
The PLN50N10CR is a Sugatsune America swivel caster, so the wheel assembly pivots to change direction easily when equipment or cabinets are steered.
The PLN50N10CR caster has a 176 lb load capacity, so each caster can carry a significant share of a cart or cabinet weight when multiple casters are used.
The PLN50N10CR caster has a 2 inch wheel diameter, which keeps the overall caster height compact while still enabling smooth rolling movement.
The PLN50N10CR caster uses a polyamide wheel, providing a hard rolling surface that supports consistent movement over firm shop or cabinet floors.
The PLN50N10CR is a threaded stem mount caster, so it engages a matching threaded connection point in the cart, cabinet, or fixture structure.
The PLN50N10CR swivel caster has no brake, allowing continuous free movement where locking the wheel is not required in normal use.
The Sugatsune swivel caster with 2 inch polyamide wheel and threaded stem mount provides ball-bearing type movement with a 176 lb load capacity, giving carts and cabinets smooth, controlled rolling in a compact format. The swivel design without a brake supports quick direction changes wherever frequent repositioning is part of daily work. By aligning projects with this PLN50N10CR threaded stem swivel caster, builders can standardize on a known load rating and movement feel across multiple fixtures. Choose this caster when a threaded stem connection, polyamide wheel material, and smooth ball-bearing swivel action match the movement and mounting needs of the job.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SLPLN50PCR Mfr# PLN50PCR | Sugatsune America Swivel Caster With 2" Wheel No Brake, Plate Mount 176lb Capacity - PLN50PCR | ||||
Sold in: 1 Each | SLPLN50PBL Mfr# PLN50PBL | Sugatsune America Swivel Caster With 2" Wheel No Brake, Plate Mount 176lb Capacity - PLN50PBL |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SLPLN50N10BL Mfr# PLN50N10BL | Sugatsune America Swivel Caster With 2" Polyamide Wheel No Brake, Threaded Stem Mount 176lb Capacity - PLN50N10BL |