Olympus DCN1 Pin Tumbler Cam Lock, 3/4" Material Thickness, Flat Black, Keyed Alike 107 - DCN1-US19-107

Olympus Pin Tumbler Cam Lock For Secure Panels

Olympus pin tumbler cam lock DCN1-US19-107 provides a keyed alike 107 locking solution for 3/4 inch material thickness, giving cabinet and fixture builders a consistent keying setup across multiple lock points. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, ties into common key systems so existing key patterns can operate this lock line. A zinc die cast body and zinc die cast pin tumbler cylinder create a solid cam lock assembly for typical woodworking and fixture environments. The flat black US19 finish delivers a dark, uniform face that blends with contemporary casework and display hardware. A 1 inch face is designed to cover splintering around the lock bore, which helps salvage slightly rough holes without adding a separate trim ring. The standard function keeps the key removable in either locked or unlocked position, which suits applications where users do not carry keys during access.

Key Cam Lock Details That Support Daily Use

• The 3/4 inch material thickness rating targets standard cabinet and panel constructions, so installers can drill and set this lock in typical casework without reworking door or drawer thickness.
• The keyed alike 107 configuration allows multiple DCN1-US19-107 locks to operate from the same key number, simplifying key management when several doors or drawers share access needs.
• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets shops coordinate with existing N Series keying layouts, avoiding mixed key systems across one project.
• Rekeyable construction via a cylinder retainer clip enables changing keying without replacing the entire lock body, which reduces future labor when key codes need to be updated.
• Passing ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261/E07271, gives commercial projects a defined performance level when specifying cam locks.
• Woodwork Institute acknowledgment provides spec-driven shops with a recognized cam lock option for woodworking projects that follow WI standards.

Flat Black Cam Lock Mounting And Face Details

The DCN1-US19-107 uses a 1 inch face that intentionally overhangs the bore edge, which helps conceal splintering created when drilling through wood or panel stock. This larger face removes the need for an additional trim ring, reducing part count during installation. Designed for 3/4 inch material thickness, the lock geometry lines up the cam throw behind typical cabinet and fixture doors, keeping latch engagement in a predictable plane. The flat black US19 finish extends across the face, so visible hardware reads as a uniform dark circle rather than a mix of metal tones, which helps hardware disappear against darker casework finishes. The standard function keeps the key removable in both locked and unlocked positions, so users can leave the cylinder without a key while doors remain either secured or ready for frequent opening.

How This Olympus Cam Lock Works In Practice

Using The DCN1-US19-107 In Cabinets And Fixtures

The Olympus DCN1-US19-107 cam lock is built around a zinc die cast body and zinc die cast pin tumbler cylinder, which provides a compact form suited to cabinet doors, drawers, and small access panels. The 3/4 inch material thickness design means the cylinder length and cam engagement are arranged for common casework stock, aligning the cam throw where it can grab frames or strikes behind the panel. A 1 inch face sits proud on the exterior, covering minor chipping at the bore edge that often occurs in wood or laminate during drilling. With the flat black US19 finish, the lock face visually recedes on darker fixtures, so the hardware does its job without drawing attention on retail, office, or residential installations that favor low-visibility security points.

Details That Support Keying, Adjustment, And Positions

The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, positions this Olympus pin tumbler cam lock within a familiar keying family, allowing projects to share key patterns across multiple lock locations. Stock keying uses KD/KA 4 pin standard, while the DCN1-US19-107 is keyed alike 107, giving a defined KA number for repeat orders or for grouping locks under the same key. Masterkeyed setups use a 5 pin standard, and grand masterkeyed options are available, which supports layered access schemes in larger installations. The cylinder is easily rekeyable via the cylinder retainer clip, so key changes can be addressed at the cylinder level. Two reversible cams work in all positions, creating flexibility in how the cam engages strikes or frames. The standard function, where the key is removable in either locked or unlocked position, helps operators remove the key immediately after turning to the desired state, reducing accidental relocking when the door or drawer needs to stay open.

Common Questions About This Olympus Cam Lock

Selecting This Cam Lock For Keyed Alike Projects

The Olympus DCN1-US19-107 flat black cam lock combines N Series keyway, keyed alike 107 stock keying, and 3/4 inch material thickness suitability, which suits casework needing consistent key control. By using a 1 inch face to cover splintering and reversible cams that work in all positions, the lock supports flexible layouts across cabinet doors, drawers, and panels. When a project calls for ANSI/BHMA A156.11 Grade 1 performance and Woodwork Institute acknowledgment in a flat black finish, this Olympus pin tumbler cam lock offers a defined, repeatable choice that aligns with those requirements.