Olympus DCN4 Pin Tumbler Cam Lock For Cabinets

Olympus DCN4 pin tumbler cam lock gives a keyed alike 107 solution for securing panels built from 1-1/2 inch material with a 3/4 inch bore diameter, so installers can match an existing N Series key system while holding to those cutout dimensions. The lock body and cylinder are zinc die cast pin tumbler construction, which delivers a solid metal housing around the cylinder that suits typical woodwork and casework environments. The standard function keeps the key removable in both locked and unlocked positions, which allows quick key pull during assembly or servicing without cycling the lock. Two reversible cams work in all positions, letting the same lock handle different cam throw directions as required by the cabinet layout. A 1 inch face covers splintering around the bore, so there is no additional trim ring required, streamlining drilling and finishing steps on site.

Keyed N Series Cam Lock Details That Matter

• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, ties this lock into that key family so shops can coordinate key control across matching hardware runs.
• Keying that can be set keyed alike with other N Series locks allows one key to operate multiple lock points, reducing key management complexity across a bank of cabinets or fixtures.
• Easily rekeyable design via the cylinder retainer clip lets locksmiths or shop personnel change keying without replacing the entire lock body, extending service life and limiting material waste.
• Passing ANSI/BHMA A156.11 Grade 1 performance requirements means the lock has been tested to a recognized standard, supporting use where a higher performance classification is specified.
• Woodwork Institute acknowledgment designates this as a WI acknowledged product, aligning it with woodworking industry expectations where that reference is part of the project documentation.

Flat Black Cam Lock Fit And Installation Use

This Olympus DCN4-US19-107 cam lock is specified for 1-1/2 inch material thickness with a 3/4 inch bore diameter, so drilling layouts can be set confidently for that panel build-up. The 1 inch face is designed to cover splintering around the bore, which lets the installer rely on a clean finished look without adding a separate trim ring step. Its standard function keeps the key removable in both locked and unlocked positions, which supports assembly, adjustment, and end-user access without needing the key left in the cylinder. Two reversible cams work in all positions, providing flexibility for vertical or horizontal orientations and different cam rotation requirements on doors, drawers, or panels.

Cam Lock Application And Performance In Use

Where This N Series Cam Lock Is Typically Applied

This pin tumbler cam lock from Olympus Lock, Inc. sits in the Locks and Latches, Cam Locks product class, so it fits projects that call for a dedicated cam-style locking point on doors or panels. It is keyed in the N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, which positions it well for jobs already built around that key profile. Stock keying supports KD or KA with 4 pin standard and stock KA numbers 101, 103, 107, and 915, and this specific model is keyed alike 107, helping project teams align multiple cabinets under a single KA number where that code is part of the keying schedule. Masterkeyed operation is 5 pin standard with grand masterkeyed capability available, so facilities using tiered keying plans can integrate these locks into a wider hierarchy while still using the same core hardware style.

Why These Locking Details Support Repeatable Results

The zinc die cast body and zinc die cast pin tumbler cylinder provide a consistent manufactured housing, which helps installers get the same fit and feel across repeated casework runs. The easily rekeyable design via the cylinder retainer clip means future keying changes can be handled at the cylinder level, so the installed footprint in the panel stays the same, helping facilities teams keep openings in service through rekeys. The standard function with key removable in locked or unlocked position simplifies workflow for carpenters and locksmiths who need to operate multiple openings during setup without leaving keys hanging in each lock. Two reversible cams that work in all positions let one lock style respond to different cam throws and orientations, reducing part variety when configuring a mix of left-hand, right-hand, or vertical applications. The 1 inch face that covers splintering protects the visual edge of the 3/4 inch bore through 1-1/2 inch material thickness, helping produce a clean, repeatable appearance across a finished bank of cabinets.

Common Questions About Olympus DCN4 Cam Lock

Select This Olympus Cam Lock For N Series Jobs

The Olympus DCN4-US19-107 cam lock pairs a flat black finish with N Series keying, keyed alike 107, so it fits projects built around that code set and visual requirement. Its design for 1-1/2 inch material thickness with a 3/4 inch bore diameter supports standard panel construction, while the 1 inch face helps clean up the bore edge without extra trim parts. For installers and facilities teams working within N Series key systems and ANSI/BHMA A156.11 Grade 1 performance requirements, this cam lock offers a defined, repeatable hardware choice.