Damper Catch for Doors combines a damper and catch in one unit for sideways opening doors, so the same compact body both slows closing and holds the door shut, which simplifies hardware layout and reduces components on the job. This black Sugatsune DC-200-25BL is designed for doors described as under 35 W, giving installers a clear role for this catch in light to medium door applications. The unit is non-handed, so it works on left- or right-opening doors without changing parts, which speeds layout on multi-door runs. The catch body passed 50,000 open and close cycles in a private test, so it is built for repeated daily use where frequent operation is expected. When used with the matching DC 200 40 setup, the system can handle doors up to 40 kg, which supports heavier sideways opening door designs in the same installation family.
This damper catch is described as easy to install by simply aligning the body with the interior wall, so mounting focuses on positioning the main housing against the cabinet side, which streamlines layout. The non-handed design means the same body mounts on either side of the opening, so installers can repeat the same process on left and right doors. The strike can be adjusted horizontally plus or minus 5 mm and vertically plus or minus 4 mm after installation, so minor errors in initial layout can be tuned out at the strike instead of remounting the body. That post-installation adjustment range helps dial in the exact pull-in and holding position, which directly improves door reveal and closing feel across multiple openings.
This Sugatsune America damper catch is intended for sideways opening doors, so it suits cabinet and similar door designs that pivot sideways rather than lifting or sliding, which keeps the hardware role clearly defined. The catch functions as both damper and latch, so it fits projects where a single concealed unit is preferred over separate closing control and holding hardware, reducing component coordination. With doors identified as under 35 W in the description, this model targets a specific door size range, which helps installers assign it to appropriate leaf dimensions. When coordinated with the DC 200 40 arrangement for doors up to 40 kg, the same damper catch concept can extend across heavier doors in a related installation group, supporting consistent function and appearance.
The strike adjustment of horizontally plus or minus 5 mm and vertically plus or minus 4 mm allows the catch point to move after mounting, which lets installers fine-tune how firmly the door is drawn in and where it rests against the cabinet. That two-direction adjustment helps compensate for minor drilling variation or material movement, which can otherwise cause doors to sit proud or tight. The unit passed 50,000 open and close cycles in a private test, demonstrating that the damper and catch mechanism has been tested for repeated operation, which matters in high-traffic cabinets that see frequent opening. Because the body is aligned with the interior wall for installation, the reference surface is straightforward, which supports faster repetition of the same setup across multiple cabinet bays.
Damper Catch for Doors is a damper and catch combination for sideways opening doors, so it is intended for doors that swing sideways on hinges rather than lifting or sliding.
Damper Catch for Doors uses an integrated damper in the catch body to control motion as the door closes, which prevents doors from slamming and reduces impact on the cabinet.
This damper catch is non-handed, so the same unit works on left- or right-opening sideways doors, allowing a common part across different cabinet orientations.
The strike on this damper catch adjusts horizontally plus or minus 5 mm and vertically plus or minus 4 mm, allowing post-installation tuning of door position and closing feel.
This damper catch, when used in the DC 200 40 configuration, can handle doors up to 40 kg, letting it support heavier sideways opening door applications in the same system.
The damper catch passed 50,000 open and close cycles in a private test, indicating that the mechanism has been exercised for repeated operation in typical door use.
Choose this Damper Catch for Doors when a damper and catch combination is needed for sideways opening doors, so one black Sugatsune DC-200-25BL unit both slows closing and holds doors shut. The non-handed body and straightforward interior wall alignment streamline installation steps, which supports efficient work on multi-door layouts. Strike adjustment of plus or minus 5 mm horizontally and plus or minus 4 mm vertically allows precise door positioning after mounting, which helps deliver consistent reveals. With successful 50,000 cycle testing and the option to handle doors up to 40 kg in the DC 200 40 setup, this catch supports demanding cabinet and door projects where controlled closing and secure holding are central requirements.