Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Damper Catch for Doors combines a damper and catch in one unit for sideways opening doors, so one compact body both slows closing and holds the door shut, which simplifies hardware layout on the cabinet. This Sugatsune America DC-200-40WT catch is designed for doors under 35 W, aligning with projects that need controlled motion on modest-width doors without overbuilding the hardware. The 6-3/16 L body gives a defined mounting footprint, which helps lay out drilling and keeps alignment consistent across multiple doors in a run. The white finish matches light interiors, so the catch blends into common cabinet casework rather than standing out on the wall. As a catch that also damps, it helps prevent slamming while still retaining the door in the closed position, supporting quieter operation in everyday use.
This Sugatsune Damper Catch for Doors is described as easy to install by simply aligning the body with the interior wall, so mounting focuses on referencing the cabinet interior rather than complex layout steps. That interior-wall alignment gives a clear visual reference, which supports consistent positioning of multiple catches across a bank of doors. The strike can be adjusted post installation horizontally plus or minus 5 mm and vertically plus or minus 4 mm, so fine-tuning can occur after the body is fixed in place, rather than remounting the entire unit. Those horizontal and vertical strike adjustments help bring the door edge into clean contact with the damper catch, which is useful on cabinets where the case may be slightly out of square or where door reveals need slight correction.
This Damper Catch for Doors is specified for sideways opening doors, so it supports door designs that swing laterally from a hinged edge rather than lifting. That sideways orientation matches typical cabinet and casework doors, which makes the catch a fit for many common interior door layouts within its stated limits. The SAP description notes this damper catch is for doors under 35 W, so it suits projects where door width stays within that dimension range and where installers want motion control without oversizing hardware. The body size of 6-3/16 L gives a predictable component length, which helps position it along the interior wall where it will meet the strike reliably as the door closes. Because the damper and catch are combined into one piece, installers can plan for a single interior mounting location, which reduces the number of separate parts interacting along the door edge.
The damper and catch combination is designed to prevent doors from slamming, so as the door approaches the closed position the motion is controlled instead of abrupt. That controlled close protects the cabinet structure and the door edge from repeated hard impacts, which is valuable in high-use environments where doors are opened and shut many times a day. Holding the door in the closed position also keeps the door flush when at rest, which contributes to consistent lines across a set of cabinets and helps avoid visual misalignment.
This Sugatsune DC-200-40WT damper catch can handle doors up to 40 kg when using DC 200 40, so it covers substantial door weight within that specification, which matters when working with dense materials or larger doors inside that limit. The combination of that weight rating and its sideways opening door focus means it can be applied on robust doors where both mass and swing are factors in closing behavior. The strike adjustability is another key part of getting repeatable operation; with horizontal adjustment of plus or minus 5 mm, the strike can be shifted side to side to dial in how the door meets the damper. That side-to-side tuning helps compensate for small layout variations, keeping the door from binding while still engaging the catch.
Vertical adjustment of the strike by plus or minus 4 mm adds up-and-down tuning, which helps align the strike height to the damper body when hinges or casework leave the door slightly high or low. Having both horizontal and vertical adjustments after installation allows installers to refine door position without relocating the main body, which saves time during final fitting. The non-handed design further streamlines work, because the same damper catch part can be used on both left- and right-swing sideways doors, reducing part sorting on site. The damper catch passing 50,000 open/close cycles in a private test indicates it is built for ongoing use, which supports consistency in projects where doors will see frequent opening and closing over the life of the cabinet.
The Damper Catch for Doors is designed for sideways opening doors, so it works with doors that swing laterally on hinges and need controlled closing and retention.
The Sugatsune DC-200-40WT damper catch can handle doors up to 40 kg when using DC 200 40, allowing use on heavier cabinet or casework doors within that limit.
The Damper Catch for Doors is installed by aligning the body with the interior wall, giving a straightforward reference point along the cabinet interior for positioning.
The damper catch strike can be adjusted post installation horizontally plus or minus 5 mm and vertically plus or minus 4 mm, allowing fine-tuning of door engagement.
The Sugatsune DC-200-40WT is non-handed, so the same unit suits both left- and right-swing sideways opening doors, simplifying planning and inventory.
The Damper Catch for Doors passed 50,000 open/close cycles in a private test, indicating it is built for frequent door operation in everyday environments.
The Sugatsune Damper Catch for Doors 6-3/16 L, White - DC-200-40WT combines damper and catch functions for sideways opening doors under 35 W, so one component both slows closing and holds the door shut. With capacity for doors up to 40 kg when using DC 200 40 and a non-handed design, it fits a range of hinged layouts within that specification. Post installation strike adjustment of plus or minus 5 mm horizontally and plus or minus 4 mm vertically supports precise final fitting. For cabinet and casework projects needing controlled closing and positive retention from a single interior-mounted part, this damper catch is built to deliver consistent door performance.