Sugatsune Push Latch, 1-13/16" Width x 1-1/8" Length, Ivory Finish - SL-B-251/IVY

Sugatsune Push Latch For Clean Door Operation

Sugatsune push latch gives you a compact way to operate a door by pulling the handle while pushing the button, so you get controlled opening in tight cabinet layouts or small framed doors. The SL-B-251/IVY model uses an external handle and push button action, which separates the grip from the latch body and helps you position the user contact point where it best suits the door design. Its 1-7/16 inch width keeps the latch footprint narrow, which helps when you are working with slim stiles or limited mounting area on cabinet frames. The 1-1/8 inch length keeps projection short, so it stays out of the way of nearby hardware and interior clearances in shallow cabinets. A 2-1/16 inch height gives you enough body depth for the internal mechanism, while remaining workable in typical cabinet carcass dimensions and door edge conditions.

Key Sugatsune Latch Details For Project Planning

• The 1-7/16 inch width keeps the SL-B-251/IVY latch compact, which helps lay out multiple doors or closely spaced partitions where hardware spacing is tight.
• The 1-1/8 inch length holds the latch body close to the mounting surface, which supports clean interior lines and reduces interference with shelves or stored items.
• The 2-1/16 inch height provides room for the push mechanism, which supports consistent button travel and engagement when the user pulls the handle while pressing.
• The ivory finish gives the latch a light neutral appearance, which coordinates with light-colored doors or interiors when the latch body is visible in the installation.
• The polyamide and polyacetal construction creates a non-metallic body and mechanism, which is useful where contact noise or metal-on-metal marking is a concern in cabinet use.
• The M3 x 14 fasteners size defines the mounting interface, which helps you select compatible screws and plan pilot holes that match the latch mounting holes.

Mounting And Fit Details For The SL-B-251/IVY Latch

The Sugatsune SL-B-251/IVY push latch mounts using M3 x 14 fasteners size, which gives you a clear metric reference for choosing screws that seat properly in the latch body. Its 1-7/16 inch width and 1-1/8 inch length help you position the latch on narrow rails or cabinet sides without crowding other components. The 2-1/16 inch height lets the body sit within common cabinet depths, which supports straightforward drilling and fastening from the inside of the case. The operating method - pulling the handle while pushing the button to open the door - keeps the load on the latch aligned with the button axis, which helps the internal mechanism cycle smoothly over repeated openings.

Using This Push Latch In Real Cabinet Work

Where The Sugatsune Push Latch Fits Best

The Sugatsune SL-B-251/IVY unique push latch works as a compact latch solution for doors where you want button-activated release combined with a separate handle pull. Its 1-7/16 inch width helps it fit on slim cabinet sides or face frame members, so it can be used on narrow utility or storage doors without crowding the edge. The 1-1/8 inch length keeps the latch body short, which lets it sit behind the door edge while preserving space for shelves or drawers behind the opening. With a 2-1/16 inch height, the body suits many cabinet carcasses where you have modest clearance between the door plane and interior components, helping you avoid conflicts with hinges or internal dividers. The ivory finish allows the latch to blend into light-colored cabinet interiors, which keeps the focus on the door design and handle rather than the latch housing itself. Polyamide and polyacetal materials keep the latch body and internal parts non-metallic, which is useful where reduced contact noise or protection of mating surfaces matters.

Why Its Dimensions And Materials Support Repeatable Results

The defined 1-7/16 inch width, 1-1/8 inch length, and 2-1/16 inch height give clear reference dimensions when laying out door hardware, which supports repeatable drilling patterns and consistent alignment across multiple cabinets. The specified M3 x 14 fasteners size ties the Sugatsune push latch to a known screw diameter and length, which simplifies selecting fixings that fully engage the material without excessive breakthrough. Using polyamide and polyacetal for the latch body and mechanism provides a stable molded form, which helps the push button and catch surfaces track predictably as the user pulls the handle while pushing the button to open the door. The ivory finish on this SL-B-251/IVY latch defines the visual appearance, which helps coordinate hardware choices so repeated installations across a project share the same look. The combination of a clearly identified manufacturer part number, SL-B-251/IVY, and these fixed dimensions helps you reorder the same latch model and maintain consistent operation from one job to the next.

Common Questions About The SL-B-251/IVY Push Latch

Select The SL-B-251/IVY Latch For Your Next Job

The Sugatsune SL-B-251/IVY push latch combines a defined 1-7/16 inch width, 1-1/8 inch length, and 2-1/16 inch height with ivory finish and polyamide/polyacetal construction, giving you a predictable latch body for cabinet layouts. Its operating method of pulling the handle while pushing the button sets a clear user action, which helps standardize how doors open across a project. With the M3 x 14 fasteners size specifying the mounting interface, this Sugatsune push latch from Wurth Baer Supply fits into planned hole patterns and hardware schedules on professional and serious DIY installs.