drawer lock cylinder satin nickel from Sugatsune America is an interchangeable cylinder lock designed for drawer and cabinet use where a clean metal finish and controlled keying matter. The lock is master keyed, so it works within a keyed system while still allowing individual cylinder changes on specific units. The satin nickel finish provides a neutral appearance that works with many drawer fronts without drawing attention. A 22 mm, or 7/8 inch, cylinder case diameter gives a compact footprint that suits typical furniture and cabinetry drawer fronts. The lock is also specified as a drawer lock housing, which identifies it as the core locking element in a drawer front mount. Being in the deadbolt locks product class means it is intended to positively secure the drawer in the closed position during normal use.
The cylinder case diameter of 22 mm, or 7/8 inch, sets the required hole size in the drawer or door front, so machining can be planned to that dimension across production runs. With a 30 mm, or 1-5/16 inch, door thickness specification, the lock is matched to relatively thick drawer or cabinet fronts found in many woodworking builds. Being defined as a drawer lock housing, the product is intended to sit in the bored front and act as the main locking body. Using a satin nickel drawer lock cylinder also helps align the visible trim with other satin nickel hardware on the same installation.
This lock can be used as a lock for ALF front mount central lock, so it supports projects that are built around that central locking concept on the front of a cabinet or case. By serving as the drawer lock housing in that system, the 22 mm, or 7/8 inch, case diameter gives a clear drilling requirement for each front. The 30 mm, or 1-5/16 inch, door thickness specification aligns with fronts that need front-mounted central locking hardware rather than thin panel doors. The satin nickel finish allows the visible portion of the cylinder to sit cleanly with other satin nickel components on the same ALF-based cabinet run.
The interchangeable cylinder lock design means the locking core can be changed without altering the surrounding drawer construction, which is useful when rekeying or addressing a compromised lock. The cylinder can be changed by using change key MD-K1, giving a single defined change tool for this 1830-MK/DN lock. Easy to replace cylinder in case key is lost translates into less disruption when access control needs to be restored, because the change happens at the cylinder level only. The master keyed configuration allows this Sugatsune drawer lock cylinder to participate in a broader keyed system while still supporting targeted cylinder swaps. Together, the 22 mm, or 7/8 inch, housing and the 30 mm, or 1-5/16 inch, thickness spec create a repeatable standard for machining and future cylinder replacement on matching drawers.
The 1830-MK/DN unit is an interchangeable cylinder lock in the deadbolt locks product class, so it serves as a secure drawer lock housing for cabinet and furniture applications.
The interchangeable cylinder feature allows the locking core to be swapped, so rekeying or replacing a compromised cylinder can be handled without changing the drawer front or housing.
This Sugatsune interchangeable lock cylinder can be changed by using change key MD-K1, which provides a consistent method to remove and install cylinders across matching locks.
This drawer lock cylinder suits 30 mm, or 1-5/16 inch, door thickness, so it matches many cabinet and drawer front constructions using similar panel thicknesses.
The drawer lock housing uses a cylinder case diameter of 22 mm, or 7/8 inch, which sets the drilling size for the lock hole in the drawer or cabinet front.
This lock can be used as a lock for ALF front mount central lock, allowing it to serve as the drawer locking point in that front-mounted central locking configuration.
The Sugatsune America drawer lock cylinder, satin nickel, master keyed, offers an interchangeable cylinder lock that supports controlled access on 30 mm thick fronts with a 22 mm, or 7/8 inch, bore. Using change key MD-K1 for cylinder changes keeps rekeying work efficient across multiple drawers. When an ALF front mount central lock setup is required, this drawer lock housing provides the specified lock point. For projects that need a defined master keyed layout with straightforward cylinder replacement, this 1830-MK/DN drawer lock aligns the hardware details with practical shop workflow.