Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
40mm strike plate nickel gives you a defined strike point sized at 40mm x 14mm x 14mm, so the lock bolt has a consistent landing area and the latch action stays repeatable from install to install. This strike plate from Sugatsune America belongs to the strikes class in the locks and latches category, which places it directly in the core hardware path for cabinet and similar door locking setups. The nickel finish on the 40mm strike plate provides a clean metal contact surface for the dead bolt, helping the bolt nose slide into position without catching on the edge of the door material. As a lock accessory, the strike plate works as the paired contact piece for the bolt, giving you a clear target when aligning the lock body on your double door layout or other cabinet configuration.
This strike plate is described as optional for applications where the dead bolt is close to the cabinet edge, so it helps when the bolt throws near a stile or face frame corner and needs a defined landing point. The same description identifies this 40mm strike plate as suitable for inset applications, placing it in scenarios where the door sits within the cabinet opening and the strike location must respect that inset reveal. As a lock accessory in the strikes class, the plate is purpose-built to accept a dead bolt, which simplifies alignment work between the lock case and the receiving side of the opening. By matching the 40mm x 14mm x 14mm sizing, you can plan your mortise, edge clearance, and face layout around a known strike footprint.
The web description specifies that the LA-3310 strike plate is for double door application of 3310 series and 3320 series, which places this part in projects where two doors meet and share a locking point. In that double door context, the 40mm x 14mm x 14mm geometry defines where the dead bolt from a compatible lock series lands, letting you plan the active and passive door alignment around a precise strike target. Because the product is further described as an optional strike plate for applications where the dead bolt is close to the cabinet edge, it suits layouts where the bolt throws near the edge of a meeting stile and still needs a metal contact surface. The same description calling out inset applications anchors the strike plate to doors that sit inside the frame, where the face of the door, the edge of the cabinet, and the lock backset all must cooperate around a fixed strike position.
The Sugatsune America branding ties this LA-3310 strike plate directly to a defined manufacturer, which gives you a consistent reference when pairing it with 3310 series and 3320 series components. The specific 40mm length and 14mm by 14mm profile give a known envelope for the strike area, so you can lay out mortises and clearances with confidence that the dead bolt on those series will aim into a correctly sized target. By being categorized under locks and latches as a strike, the part is clearly intended as the receiving point for a dead bolt, which keeps its job distinct from latches or catches during design and installation work. The optional designation means it addresses situations where standard strikes for these series do not fit edge or inset constraints, allowing you to use this model to keep bolt engagement controlled when the meeting line or cabinet geometry changes from project to project.
The 40mm strike plate nickel is described as 40mm x 14mm x 14mm, giving you a compact, clearly defined strike area to reference when laying out mortises and planning dead bolt engagement.
This strike plate is described for applications where the dead bolt is close to the cabinet edge and for inset applications, so it fits layouts with tight edge clearances and doors set within the opening.
The LA-3310 strike plate is identified as for double door application of 3310 series and 3320 series, aligning its strike point with the dead bolt position of those lock series.
This Sugatsune strike plate is called optional because it is intended for specific situations, such as dead bolts close to cabinet edges or inset applications, where standard strike solutions may not match the geometry.
The nickel finish on this strike plate provides a smooth metal contact surface for the dead bolt, supporting consistent bolt entry into the strike area during regular lock operation.
For double door application of 3310 series and 3320 series, this strike plate defines a fixed dead bolt landing point that helps keep the active door locked consistently against the meeting door edge.
The LA-3310 40mm strike plate nickel from Sugatsune America combines a defined 40mm x 14mm x 14mm strike area with a nickel finished contact surface, giving your dead bolt a consistent landing spot. Its description as an optional strike plate for applications where the dead bolt is close to the cabinet edge or for inset applications positions it well for tighter cabinet layouts. With a stated role in double door application of 3310 series and 3320 series, it fits projects where those locks are part of the hardware plan and a precise strike location is needed.