Sugatsune Trash Grommet, 9-1/2"W x 4-1/2"H x 3-11/16"D - AZ-SLP230

Sugatsune Trash Grommet AZ-SLP230 For Waste Control

Sugatsune trash grommet AZ-SLP230 is a multi-purpose garbage guide that directs waste into the basket, so trash drops into the bin instead of hitting cabinet edges. This part is classified as a replacement item in the Replacement Bins and Accessories product class, which lets you restore function without changing the entire waste system. The grommet measures 9-1/2 inches wide, helping cover the top opening so users have a clear target area when disposing of waste. Its 4-1/2 inch height provides a raised edge that steers trash downward, reducing spill-over at the bin rim during everyday use. The 3-11/16 inch depth sets the guide front-to-back, so it aligns over the bin opening while staying compact inside a cabinet. Branded by Sugatsune America, it matches AZ-GD series waste units for consistent geometry where the guide and bin meet.

Key Garbage Guide Details For Daily Use

• The AZ-SLP230 is described as a guide for garbage into a waste basket, so trash flows directly toward the bin opening, helping keep surrounding cabinet surfaces cleaner over time.
• The 9-1/2 inch width spans the waste opening, giving users a generous entry area that forgives off-center drops, which can reduce stray trash landing outside the bin.
• The 4-1/2 inch height creates a raised lip that channels items downward, which helps keep lighter trash from sliding across the top edge or bouncing away from the bin.
• The 3-11/16 inch depth positions the guide over the bin footprint, which supports consistent alignment where the opening of the guide and the basket work together.
• The product is listed in the Kitchen & Bath Cabinet Accessories, Trash Bins & Grommets category, tying it directly to built-in cabinet trash locations in kitchen and bath runs.

Installation Context For AZ-SLP230 Trash Grommet

The Sugatsune trash grommet AZ-SLP230 is identified for use with the AZ-GD series, specifically SLAZ-GD231-HL and SLAZ-GD232-HL units, so the opening geometry is matched to those waste systems. That pairing means the guide is dimensioned around the bin location, helping installers position it accurately over the basket in typical cabinet layouts. The 9-1/2 inch width, 4-1/2 inch height, and 3-11/16 inch depth define the envelope you need to account for when planning clearances above a waste basket. Because this part is a replacement item, it lets you refresh the trash opening area on existing AZ-GD installations while keeping the underlying waste basket configuration in place.

How This Garbage Guide Works In Cabinet Runs

Use With Sugatsune AZ-GD Series Waste Baskets

The AZ-SLP230 garbage guide is specified for use with AZ-GD series waste systems, including SLAZ-GD231-HL and SLAZ-GD232-HL, so its opening is sized to those baskets. That direct pairing supports predictable drop-through when users dispose of trash, because the guide is shaped around the intended bin footprint. Being part of the Kitchen & Bath Cabinet Accessories, Trash Bins & Grommets category, it fits common cabinet-based waste locations in kitchen and bath installations. In practice, that means the guide sits where users naturally reach in a countertop or cabinet opening and directs garbage into the waiting basket below, helping maintain a cleaner interface between work surface and waste container throughout repeated use.

Dimensions That Support Consistent Waste Drop

The AZ-SLP230 is described as 9-1/2 inches wide, 4-1/2 inches high, and 3-11/16 inches deep, so the opening and sidewalls form a defined chute. That 9-1/2 inch width gives lateral coverage over the basket, which improves catch area for off-center drops. The 4-1/2 inch height builds a guiding collar that steers trash downward instead of letting it slide sideways at the top of the bin. The 3-11/16 inch depth sets how far the guide extends over the bin front-to-back, which helps align the trash path with the basket center. As a multi-purpose lid and garbage guide, these dimensions work together so the waste stream is funneled into the AZ-GD series baskets in a repeatable way across daily opening and closing cycles.

Common Questions About AZ-SLP230 Trash Grommet

Select AZ-SLP230 For Matched AZ-GD Waste Systems

The Sugatsune trash grommet AZ-SLP230 combines a defined 9-1/2 inch by 4-1/2 inch by 3-11/16 inch form with a purpose-built garbage guide role for AZ-GD series baskets. For installations centered on SLAZ-GD231-HL or SLAZ-GD232-HL waste units, this Replacement Bins and Accessories component lets you align the opening and basket geometry around a single matched part number. Sugatsune America branding and the dedicated AZ-SLP230 designation clearly identify the piece you need when planning, upgrading, or restoring a cabinet-based trash opening around AZ-GD series hardware.