Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
22mm glass standoff with flat face plate provides a defined 22mm stand-off point that keeps tempered glass panels spaced from the mounting surface, which helps create clean, consistent reveals on shelving, signage, or display work where alignment matters.
The satin stainless steel finish on this glass standoff keeps reflections subdued, which supports a more uniform look on visible installations where bright glare could distract from the glass itself or from items on display behind the panel.
The flat face plate on this glass standoff spreads contact over a broader surface of the tempered glass, which helps distribute clamping force more evenly at the fastening point so the panel sits stable during typical use.
This glass standoff from Sugatsune America is identified by manufacturer part 7061VA, which ties directly to the specified 22mm size and satin stainless steel finish so repeat orders match existing hardware on ongoing or multi-room projects.
This glass standoff is recommended for use with tempered glass, so the flat face plate works with the edge strength of that material to hold panels in place while fixtures, multimedia equipment, or display items operate around the installation.
The recommended screw size of an M5 bolt defines the core fastening interface for this glass standoff, which allows installers to match bolts to substrate conditions while maintaining a common thread size at each stand-off point.
By using an M5 bolt as specified for the glass standoff, installers can keep tooling and drill sizing consistent along the run, which supports more predictable pull-down of the satin stainless hardware against wall, cabinet, or fixture surfaces.
The 22mm designation for this glass standoff sets its scale relative to the panel and surrounding hardware, which assists in planning spacing and visual proportion when coordinating with other Sugatsune America standoffs or complementary mounting components.
This glass standoff with flat face plate sits within the shelf, closet, and multimedia components category, which positions it for use on organization runs, media walls, or workspace layouts where tempered glass shelves or panels support the overall system design.
In closet or garage organization settings, the satin stainless steel glass standoff can be applied where tempered glass panels divide zones or present storage surfaces, keeping the panels held off structural supports while maintaining a consistent, hardware-defined stand-off depth.
Within multimedia and workspace components, the 22mm glass standoff can support tempered glass elements used around displays or equipment, where the flat face plate contact helps the glass sit flush to the stand-off while supporting the planned reveal behind the panel.
The Sugatsune America branding on this glass standoff, identified as part 7061VA, links the standoff to a defined manufacturer catalog line, which allows projects already relying on Sugatsune hardware to match finish and geometry across glass-related mounting points.
The glass standoff with flat face plate uses its flat contact surface to present a predictable interface against tempered glass, which helps the installer pull the panel tight and parallel to adjacent supports when multiple standoffs carry the same shelf or divider.
The satin stainless steel finish on this glass standoff maintains a stable visual tone around the mounting points, which assists in achieving a consistent finished appearance across several panels since the satin surface tends to read uniform under varied lighting angles.
The recommended M5 bolt for this glass standoff defines a single bolt diameter to plan around, which helps streamline drilling patterns and fastener sourcing so each stand-off installation point behaves similarly under load within the overall system.
Identifying the glass standoff as part 7061VA ensures that future replacement or expansion panels can reference the same 22mm size and satin stainless finish, which supports continuity when extending shelving, closet, or multimedia layouts over time.
Because the glass standoff is called out specifically for tempered glass, installers can orient its flat face plate and standoff body around the thickness and edge characteristics typical of tempered panels, which helps the hardware interface align with common glass fabrication practices.
Classifying this component under standoffs within shelf, closet, and garage organization and multimedia and workspace components frames it as part of a larger system, which helps designers and installers treat it as a repeatable mounting point when standardizing hardware across multiple rooms.
The 22mm glass standoff is recommended for use with tempered glass, which aligns its flat face plate contact with typical shelf and display glass used in organization and multimedia projects.
The glass standoff is designed around a recommended M5 bolt, which defines the thread size for creating the fastening connection to walls, cabinets, or fixture structures.
The flat face plate on the glass standoff spreads contact across the glass surface, which helps distribute clamping pressure and keep tempered glass panels seated evenly at the mounting point.
The satin stainless steel finish on the glass standoff keeps reflections subdued, which supports a consistent, professional appearance on visible closet, shelf, or multimedia glass layouts.
The 7061VA part number identifies this Sugatsune America glass standoff as the 22mm satin stainless version, which helps match size and finish when coordinating across multiple installation locations.
This glass standoff is listed under standoffs within shelf, closet and garage organization and multimedia and workspace components, positioning it for glass panel and shelf mounting in those applications.
The 22mm glass standoff with flat face plate in satin stainless steel pairs a defined stand-off size with a tempered-glass-focused design, which supports consistent reveals and appearance wherever glass panels contribute to closet, shelf, or multimedia layouts.
With its recommended M5 bolt interface, this Sugatsune America 7061VA glass standoff lets installers plan fastening around a single thread size while aligning size and finish across related glass mounting points.