Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
30mm glass standoff from Sugatsune America is a standoff designed to support glass shelves in multimedia, workspace, or organizational installations. The satin stainless steel construction provides a consistent appearance across visible hardware, which matters anywhere the shelf support remains exposed below the glass. The standoff is specified for glass thickness from 6 to 10 mm, covering common 1/4 inch to 1/2 inch shelf glass so one part can serve a range of light-duty glass shelf builds. A load capacity of 25 kg, or 55 lbs per pair with shelf support at the center of the glass, defines how much weight the assembly is intended to carry, which is important when planning what the finished shelf will hold. The 30mm round face plate spreads bearing across the glass contact area, helping distribute load over the stated 6 to 10 mm glass thickness range.
This Sugatsune America 30mm glass standoff is part of the standoffs product class, intended to hold glass within the specified 6 to 10 mm thickness range, which frames the type of glass that will seat correctly in the hardware. With a load capacity of 25 kg, or 55 lbs per pair when the shelf support is at the center of the glass, shelf layout can be based on using pairs at calculated intervals to keep each pair operating within its stated rating. The maximum distance of 500 mm between supports influences where to position these pairs along the mounting surface so the glass panel stays inside the tested span. A glass depth maximum of 300 mm defines how far the shelf can project from the support line while remaining within the configuration described by the manufacturer.
The 30mm glass standoff with round face plate from Sugatsune America is listed under standoffs for shelf, closet, and garage organization, as well as multimedia and workspace components, which positions it for applications where glass shelving is part of the storage or display solution. The satin stainless steel finish suits environments where hardware is visible around electronics, workstations, or organized wall systems, because the metal surface remains an intentional design element. With a glass thickness range of 6 to 10 mm, or 1/4 inch to 1/2 inch, the part fits commonly used glass shelf stock, letting installers specify a standard thickness without stepping outside the hardware limits. The glass depth maximum of 300 mm aligns with modest shelf depths often used for media components or small storage, which keeps the shelf proportionate to the standoff geometry.
The load capacity of 25 kg, or 55 lbs per pair with shelf support at the center of the glass, gives a concrete figure for calculating how many standoffs and pairs are appropriate for a given shelf length and intended contents, supporting consistent design decisions from one installation to the next. The distance max of 500 mm between supports serves as a layout guideline for spacing, helping create a repeatable pattern when multiple shelves are mounted along a wall or within a system. The 30mm round face plate size provides a predictable bearing surface on the glass, which supports consistent alignment when matching several shelves in a row. The 84 g weight per standoff contributes to knowing the total hardware load added to a panel or wall, which is useful when the supporting structure has its own constraints. With the manufacturer part number 7083VA clearly identifying this configuration, spec sheets and job documents can point to the same standoff style for future repeat work or replacements.
The 30mm glass standoff supports glass thickness from 6 to 10 mm, corresponding to about 1/4 inch to 1/2 inch, so it works with common glass shelf sizes in that range.
The Sugatsune 30mm glass standoff has a load capacity of 25 kg, or 55 lbs per pair with shelf support at the center of the glass, guiding load planning for each shelf.
The 7083VA glass standoff specifies a distance max of 500 mm between supports, which sets the upper limit for spacing pairs along the glass edge.
The 30mm glass standoff is rated for a glass depth max of 300 mm, so shelves are intended to project up to that dimension from the mounting line.
The glass standoff is described as satin stainless steel, providing a brushed metal appearance suitable for visible shelf supports in organized spaces.
The 7083VA part number identifies this specific Sugatsune glass standoff configuration, helping match the same 30mm satin stainless model on future projects.
The Sugatsune America 7083VA 30mm glass standoff offers clearly stated parameters for glass thickness, shelf depth, support spacing, and load capacity, so shelf designs can be laid out around known limits. With satin stainless steel construction, a 6 to 10 mm glass range, 25 kg or 55 lbs load capacity per pair at the center of the glass, 500 mm maximum distance between supports, and 300 mm glass depth maximum, this standoff gives installers specific numbers to work from when planning glass shelves in organizational, multimedia, or workspace settings.