Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
22mm glass standoff gives a compact point support for glass, using a small housing and cover cap so the mounting stays visually clean while holding the panel at a fixed offset. Sugatsune America specifies this standoff for 8 mm (5/16") glass, so installers can match it directly to common shelf and panel thickness without reworking edges. The design uses a lift up lid release, which lets the glass be clamped or released from the fitting by opening the lid rather than dismantling the entire mount, saving time during layout changes or service. A non-handed layout means the same part works on either side or orientation, reducing part variation on the job. With a load capacity of 6 kg (13.2 lbs) each, the standoff supports modest glass shelves or panels when spaced correctly, helping organize multimedia or workspace components without overloading a single point.
The housing material is 304 stainless steel, which resists corrosion in normal indoor environments and keeps the standoff body structurally sound around the glass contact area. A bracket made from 303 stainless steel supports the internal clamping components, giving a metal-to-metal load path from the glass to the mounting surface for consistent performance. The washer is polyacetal, so it cushions the glass against the metal parts, helping distribute clamping pressure more evenly across the 8 mm edge. The finish is described as polished stainless steel, giving the visible surfaces a clean metallic appearance that coordinates with other stainless fittings in shelf, closet, or multimedia installations. Together, these materials support repeatable mounting of glass panels where a compact, metal-bodied point support is preferred.
This 22mm glass standoff from Sugatsune America sits in the Shelf, Closet & Garage Organization and Multimedia and Workspace Components categories, so it is suited to projects where glass panels support or display items in organized runs. In closet or shelf layouts using 8 mm (5/16") glass, the standoff provides discrete support points that keep the glass elevated while exposing the edge for a lighter visual effect. In multimedia or workspace settings, the same 8 mm rating and 6 kg (13.2 lbs) per standoff capacity allow installers to build small glass platforms for components within the specified load range. The compact design is helpful in dense installations, because the 22mm body occupies minimal surface area, leaving more room for equipment, cable paths, or adjacent hardware. With a polished stainless finish, the visible portion of the standoff presents a finished look that matches other stainless details in built-in storage or technology furniture.
The glass thickness specification of 8 mm (5/16") keeps the clamping gap aligned to a standard size, so each standoff grips the glass consistently along the run and reduces variation from piece to piece. The lift up lid release design means the installer can loosen or open the lid to position the glass, then close it back down to secure the panel, which shortens the time needed to fine-tune alignment during multi-point installs. Because the standoff is non-handed, each unit installs the same way regardless of side, allowing the layout to mirror or change direction without switching parts. The 6 kg (13.2 lbs) each load capacity gives a straightforward value per support location, helping calculate the number of mounting points for a shelf or panel with predictable performance. With 304 stainless steel for the housing and 303 stainless for the bracket, the metal components maintain their shape under clamping load, while the polyacetal washer provides a controlled bearing surface against the glass edge. The polished stainless finish keeps the hardware presentable where the standoff is visible, supporting consistent appearance alongside other stainless steel components in the project.
The 22mm glass standoff is specified for 8 mm (5/16") glass, so panels in that thickness range seat properly in the clamp for secure mounting.
The 7120VA glass standoff has a load capacity of 6 kg (13.2 lbs) each, which helps determine how many supports are needed along a glass shelf or panel.
The glass standoff uses a 304 stainless steel housing, a 303 stainless steel bracket, and a polyacetal washer, combining metal strength with a cushioned contact surface for the glass edge.
The lift up lid release lets installers open the lid to position or remove the 8 mm glass, then close it to clamp, reducing time spent on alignment and adjustments along a run.
The 7120VA glass standoff is non-handed, so the same part works on either side or orientation, simplifying layout changes and standardizing inventory.
The stainless glass standoff has a polished stainless steel finish, giving the visible surfaces a clean metallic look that coordinates with other stainless hardware in the project.
The 22mm glass standoff with cover cap, part number 7120VA from Sugatsune America, combines an 8 mm (5/16") glass rating with a 6 kg (13.2 lbs) per unit load capacity for controlled glass support. With a compact 22mm body, polished stainless finish, 304 stainless housing, 303 stainless bracket, and polyacetal washer, it suits shelf, closet, multimedia, and workspace installations where visible hardware must stay precise and consistent. Use this standoff when a small stainless steel point support is needed to carry 8 mm glass panels within the specified weight range.