J95 hinge glass faceplate is a dedicated faceplate that enables the Sugatsune J95 hinge to be used in glass or acrylic door installations, so the same hinge design can carry over from wood doors to transparent or acrylic panels. The faceplate is specified for a recommended panel thickness of 5/16 inch (8 mm), which keeps clamping forces and alignment matched to typical glass and acrylic stock used in cabinet and display work. This version uses the GH-J95FP-Q1/SL configuration, identifying it as the silver-toned option in the series, so it coordinates with hardware calling for a nickel appearance. By matching the J95 hinge geometry, the faceplate lets installers treat a glass or acrylic door much like a standard panel during layout, which supports predictable hinge positioning and repeatable door gaps across a run.
The J95 hinge glass faceplate is built around a recommended panel thickness of 5/16 inch (8 mm), so layout work can assume a consistent material dimension when planning glass or acrylic doors. Because the faceplate is intended to enable the J95 hinge to be used in glass or acrylic door installations, hinge positioning, reveal targets, and clearances can follow the J95 pattern while accounting for the known panel thickness. The GH-J95FP-Q1/SL variant aligns with a nickel appearance, which keeps the visible hardware in step with other nickel-finished components around the door opening. With the faceplate tuned to this thickness range, installers can plan boring, edge distances, and door sizing around 8 mm stock expectations during shop or site work.
The J95 hinge glass faceplate is intended for projects where a Sugatsune J95 hinge needs to operate a glass or acrylic door, so display cases, feature cabinets, or specialty enclosures using transparent panels can share the same hinge line as adjacent opaque doors. Its design that enables the J95 hinge to be used in glass or acrylic door installations lets fabricators approach layout as a continuation of an existing J95 hinge plan, rather than switching to a separate hinge style when the material changes. The recommended panel thickness of 5/16 inch (8 mm) ties directly to standard glass and acrylic sheet sizes, supporting installations in cabinetry or fixtures where 8 mm panels are already part of the design package.
The specified 5/16 inch (8 mm) panel recommendation on the J95 hinge glass faceplate sets a clear target for material choice, which helps manage how the hinge load is transferred into a glass or acrylic door during repeated opening and closing. By aligning with this thickness, the clamping and bearing conditions created when the J95 hinge is used in glass or acrylic door installations remain consistent, so door motion can track similarly across a bank of openings. The GH-J95FP-Q1/SL designation marks this faceplate as the nickel-finish variant within the series, and that alignment with a silver tone allows the hinge hardware to follow a nickel design theme across doors and frames. With finish options also covering Matte Black, Antique Brass, and 24K Gold, the J95 hinge family can appear in a range of project styles while keeping the same mechanical layout on glass or acrylic panels.
The J95 hinge glass faceplate enables the J95 hinge to be used in glass or acrylic door installations, so a J95-based layout can carry over from wood doors to transparent panels.
The J95 hinge glass faceplate is recommended for a panel thickness of 5/16 inch (8 mm), aligning with common glass or acrylic sheet sizes used in cabinet and display work.
The GH-J95FP-Q1/SL designation identifies this J95 hinge glass faceplate as the silver-toned option, matching hardware where a nickel appearance is required.
The faceplate enables the J95 hinge to be used in glass or acrylic door installations, so the same component can be applied to either material when thickness aligns with 5/16 inch (8 mm).
This J95 hinge glass faceplate uses the silver GH-J95FP-Q1/SL configuration, providing a nickel look that keeps hinges visually consistent with other nickel-finish hardware.
The J95 hinge glass faceplate line is available in Matte Black, Antique Brass, 24K Gold, or Nickel, allowing the hinge setup to match different project finish schemes.
The J95 hinge glass faceplate in the GH-J95FP-Q1/SL version connects a Sugatsune J95 hinge to glass or acrylic doors built from 5/16 inch (8 mm) panels, so transparent fronts can follow the same hinge layout as adjacent doors. The nickel-style silver appearance keeps visible hardware aligned with a nickel finish schedule across cabinets, displays, or fixtures. For projects that mix wood doors with glass or acrylic openings, this hinge accessory lets the J95 hinge family extend cleanly across all door types.