Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
H160 EUROPEAN HINGE 18MM OVERLAY FS describes a concealed hinge designed for thick cabinet doors with an 18 mm overlay, so it lets you hang heavy, thicker doors while keeping hardware hidden for a clean cabinet face. The hinge is a free swinging style, so the door moves without built-in self-closing resistance, giving you predictable motion where you want external or separate closing control. A maximum opening of 160 degrees allows the door to swing wide, which improves access to cabinet interiors during installation, adjustment, and everyday use. The hinge is classified as a European concealed long arm hinge, so it suits modern concealed applications where cup-style routing and interior mounting are standard. A satin chrome finish on the hinge offers a neutral metal appearance that blends well inside cabinets, supporting consistent hardware looks across a shop or project run.
This concealed hinge uses a screw-on style, so it fastens directly to the door and works with a mounting plate for attachment to the cabinet, matching standard shop tooling and screw-driving workflows. The hinge is identified as a free swinging model, which means it does not provide self-closing, so door motion depends on alignment and any separate catch or closing system in the cabinet design. The product description identifies the mounting plate part number SL100-04A-W-32, which ties the hinge to a specific plate choice and supports consistent installation geometry across similar cabinets. The product sits in the European thick door hinge category, so its geometry is set up for heavy, deep doors where cup boring depth and clearances matter more than on standard thin fronts.
The product is described as a concealed hinge for thick doors with 18 mm overlay, so it is suited to cabinet constructions using 33 to 40 mm thick door stock where a European-style hidden hinge is required. Its classification under European concealed long arm hinges indicates it follows the familiar cup-and-arm format used in many cabinet shops, which helps integrate it into existing boring patterns and hinge press setups. The hinge is also identified as a free swinging 3/4 inch overlay face-frame and frameless thick door hinge, so it is intended for both face-frame cabinets and frameless boxes that share the 18 mm overlay requirement. Being a concealed cabinet hinge aligns it with indoor cabinet and furniture applications rather than structural or exterior door work, focusing it on interior casework projects.
The specific H160-34/18 manufacturer part number clearly ties the hinge to Sugatsune Americas H160 European hinge family, so shops can reorder the same geometry and behavior for repeat builds or repairs. Its 18 mm overlay value defines the relationship between the door edge and cabinet front, giving installers a reliable dimension to use when laying out boring distances and margin from the door edge. The door thickness range of 33 to 40 mm (1-5/16 inch to 1-9/16 inch) tells builders exactly when this hinge will match the door cross-section, which supports accurate material selection and helps avoid mismatches where cups would break through thin doors. A maximum opening of 160 degrees means the arm and cup geometry are designed for wide-swing applications, which improves user access and can reduce hinge stress when doors are opened fully during installation or service. The noted satin chrome finish establishes the hinge appearance, which matters when matching visible hardware themes across cabinet interiors and aligning with other satin chrome components.
The H160-34/18 hinge supports door thickness from 33 to 40 mm (1-5/16 inch to 1-9/16 inch), which matches many thick cabinet door designs used in higher-end casework.
This Sugatsune hinge is designed for an 18 mm overlay, so the door covers 18 mm of the cabinet front, guiding drilling and layout for consistent reveals across a run of cabinets.
The hinge allows a maximum opening of 160 degrees, so doors can swing well past a right angle, improving interior access and helping during installation or adjustment work.
The description notes free swinging 3/4 inch overlay face-frame and frameless thick door use, so it is intended for both cabinet construction styles that share the 18 mm overlay.
The hinge is paired with mounting plate SL100-04A-W-32, which sets the cabinet-side connection and supports consistent mounting geometry across installations using this system.
The hinge is described as free swinging, so it does not self-close; door position depends on alignment and any separate closing devices used in the cabinet design.
This Sugatsune American concealed cabinet hinge is built for thick doors with an 18 mm overlay, so it targets projects where standard hinges will not match the material. The 33 to 40 mm door thickness range, 160 degree maximum opening, and free swinging operation support demanding cabinet builds that require wide access and flexible door control. Pairing with mounting plate SL100-04A-W-32 and using the H160-34/18 part number keeps ordering and installation consistent across multiple jobs. For thick-door face-frame or frameless cabinets using European concealed hardware, this hinge aligns geometry, appearance, and motion with the needs of professional and serious DIY cabinet work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SL100-04A-W-32 Mfr# 100-04A-W-32 | 1.5mm 2D Adjustable Steel Wing Base Plate For H160 Series Hinges, Screw-On, Satin Chrome |