Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune H160-34/23 is a free-swinging concealed hinge built for thick cabinet doors up to 1-9/16 inches, in a Satin Chrome finish, on both face-frame and frameless cabinets.
A standard concealed hinge is sized for doors in the 16 to 22mm range. Push past that into thick solid-wood doors, furniture-grade panels, or specialty cabinetwork, and the cup geometry no longer seats correctly. The H160-34/23 is purpose-built for that situation. Its 40mm cup and 15mm cup depth handle doors up to 1-9/16 inches thick, and the straight arm delivers 7/8 inch overlay so the door covers its share of the cabinet side. The 48mm boring pattern matches the door-side bore for this series. A separate base plate mounts to the cabinet and the hinge screws to it; the plate is sold separately and should be matched to this Sugatsune series.
The 90 degree opening is the correct geometry for a thick door in this configuration. The reduced swing compared to a standard 110 degree hinge is not a shortcoming; it is the angle that lets a thick door move through its arc without binding against the cabinet front.
The hinge body is steel with a Satin Chrome finish. Satin Chrome reads as a cool, brushed tone that pairs naturally with contemporary hardware and stainless fixtures. In a thick-door application where the hinge is doing real structural work, steel construction keeps the connection solid over time. Because this is a free-swinging hinge with no spring or damper, there are no moving mechanical sub-components to wear, which keeps the action consistent.
Cabinetmakers building with thick solid-wood fronts, furniture makers working in hardwood slab doors, and designers specifying substantial door profiles will find this hinge in the right range. It suits face-frame and frameless cabinets equally. The free-swinging action is the right choice for push-to-open setups, ADA-accessible installs, or any application where the door should stay put at whatever angle it is set to rather than spring back closed. If the project calls for a spring self-close or a damped soft-close, this is not the hinge for it; the closing version of this series handles that requirement.
Yes. This hinge mounts to a base plate on the cabinet, and the plate is sold separately. Use a plate matched to this Sugatsune series; plates are not interchangeable across brands.
The 90 degree arc is the correct geometry for thick-door applications. The reduced swing gives a thick door the clearance it needs to move without hitting the cabinet front. It is by design, not a limitation.
Free-swinging means there is no spring and no damper. The door stays wherever you leave it and does not pull itself shut. For a door that should close on its own, choose a self-close version of this series instead.
This hinge is sized for thick doors up to 1-9/16 inches. For standard doors in the 5/8 to 7/8 inch range, a standard concealed hinge with a 35mm cup is the right fit.
When the door is too thick for standard hardware, the H160-34/23 provides the cup depth, the bore geometry, and the Satin Chrome finish to complete the job cleanly on face-frame and frameless cabinets alike.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SL100-04A-W-32 Mfr# 100-04A-W-32 | 1.5mm 2D Adjustable Steel Wing Base Plate For H160 Series Hinges, Screw-On, Satin Chrome |