Concealed Hinge For Thick Door Overlay Projects

H160 EUROPEAN HINGE 28MM OVERLAY FS describes a concealed cabinet hinge built for thick doors with a 28 mm overlay, so it supports door layouts where the door needs to cover more of the face frame or panel edge while staying hidden when closed. This hinge is in the concealed cabinet hinges class, which means the hardware stays out of sight and gives a cleaner cabinet interior, useful on higher-end installations and commercial jobs. The hinge offers a maximum opening of 160 degrees, allowing the door to swing wide open so access to the interior is less restricted during use or when working inside the cabinet. It is designed specifically as a hinge for thick doors, so it addresses applications where standard European hinges do not provide the correct geometry or clearance. The satin chrome finish identifies the visual appearance of the hardware, supporting projects that coordinate exposed metal parts across a run.

Key Hinge Details That Drive Cabinet Results

• The 28 mm overlay design positions the door to cover more of the frame or case front, which helps achieve consistent reveals when aligning doors across multiple openings.
• The maximum 160 degree opening allows wide door swing, which improves day-to-day cabinet access and gives more working room during installation or adjustment at the hinge side.
• The hinge is specified for thick doors, so it suits layouts using door thickness in the 33 to 40 mm range where standard hinges often conflict with the cabinet interior.
• The satin chrome finish defines the visible look of the hinge parts, supporting jobs where exposed hinge edges need to match other satin chrome hardware in the space.
• The product sits in the European concealed long arm hinges category, which indicates a geometry suited to modern frameless and face-frame cabinet construction using concealed hardware.

Installation Considerations For This Thick Door Hinge

This Sugatsune America hinge is engineered as a screw-on style, so the cup and hinge arm fasten to the door and mounting plate by screws during installation, giving a straightforward mechanical connection. The design is described as a face-frame and frameless thick door hinge with 1-1/8 inch overlay, which means it is intended to work in both face-frame and frameless cabinet construction where that overlay dimension is required on thick doors. The door thickness range of 33 to 40 mm, also given as 1-5/16 to 1-9/16 inches, defines when this hinge geometry aligns the pivot point correctly to move the thicker door without binding the edge against the case. Working within this thickness window helps the 160 degree opening function as specified so the door clears adjacent surfaces smoothly through the full swing.

Using The Sugatsune Hinge In Cabinet Projects

Where This Sugatsune Thick Door Hinge Fits Best

The Sugatsune Free Swinging 1-1/8 inch overlay face-frame and frameless thick door hinge satin chrome, 90 degree screw-on - H160-34/28 is intended for situations where doors are thicker than standard and need a concealed solution. Being categorized as a European concealed long arm hinge positions it for modern cabinet construction that favors clean lines and hidden hardware. The stated use as a concealed hinge for thick doors with 28 mm overlay means it fits cabinetry where the design calls for heavier doors that visually cover more of the cabinet front. The ability to open to a maximum of 160 degrees lets this hinge serve on cabinets where wide access is useful, such as storage cabinets or work-area casework. As part of the concealed cabinet hinges class, it supports projects where the hardware function is needed but the components must stay largely out of sight day to day.

Why The Verified Hinge Details Matter On The Job

The 28 mm overlay value is important because it sets how far the door covers past the cabinet opening, affecting how doors line up with each other and with adjacent panels across an installation. The specified door thickness range of 33 to 40 mm means the hinge geometry is tuned to move that mass of material without the edge dragging against the case, helping reduce rework from rubbing doors. The maximum 160 degree opening angle means the hinge allows the door to swing far enough to clear the interior, which can simplify fitting interior components and loading larger items. The screw-on description identifies a fastening method that allows the hinge to be attached and repositioned using standard screws, supporting adjustments on site. The satin chrome finish provides a consistent appearance on the metal components, which matters when hinge edges or arms are partially visible in certain cabinet layouts.

Common Questions About This Thick Door Hinge

Selecting This Hinge For Thick Door Cabinet Work

The Sugatsune H160-34/28 hinge combines a 28 mm overlay, a 33 to 40 mm door thickness range, and a maximum 160 degree opening to address thick door cabinet layouts that need wide access and consistent reveals. Its role as a concealed cabinet hinge in the European concealed long arm hinges category supports modern casework where hardware stays hidden yet must move heavier doors smoothly. For projects using satin chrome hardware, the satin chrome finish on this hinge helps maintain a unified appearance around the installation. When a thick door application calls for a free swinging concealed hinge with these overlay and opening characteristics, this model provides a focused option to match those requirements.