Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune H160-C34/0 is a self-close concealed hinge designed for inset doors on thick-door cabinets, available in Satin Chrome and suited to both face-frame and frameless construction.
Inset doors sit flush inside the cabinet opening rather than overlapping the front, and that look demands tight tolerances and hardware that holds position. This hinge is engineered for that application on doors thicker than the standard 16 to 22mm range, up to 1-7/16 inches. The 40mm cup and 48mm boring pattern replace the standard 35mm cup geometry, giving the hinge body the depth and purchase it needs in a thicker door. A separate base plate, matched to your cabinet construction and sold separately, completes the installation. The plate must be Sugatsune-compatible; plates from other brands will not connect to this hinge.
The hinge is steel with a Satin Chrome finish, a low-sheen tone that reads as clean and contemporary without drawing attention to itself inside the cabinet reveal. Because inset work lives on the visible gap around the door, finish consistency matters: Satin Chrome coordinates well with pulls, knobs, and other hardware already specified in that family. The screw-on mounting and full crank arm are steel throughout, so the hinge holds its position under the repeated load of a thick, heavy door closing against its self-close spring.
Specify this hinge when the job calls for a flush inset door on a cabinet with thick stock, whether frameless box construction or a face-frame case. It suits furniture builders, custom cabinet shops, and millwork contractors working with heavier door materials where a standard concealed hinge simply will not bore or seat at the right depth. The 90 degree opening is the designed angle for this thick-door and inset combination, not a restriction. For doors at standard thickness, use a standard concealed hinge with a 35mm cup instead.
Thick doors require a larger, deeper cup to seat properly. A standard 35mm cup bored into a thick door either will not fully engage or risks breaking through the face veneer. The 40mm cup with 15mm depth is sized for the door thickness this hinge is built to handle.
No. The hinge body mounts to a base plate that fastens to the cabinet, and the plate is sold separately. Use a Sugatsune-compatible plate matched to your cabinet type. Plates from other brands will not fit this hinge.
This hinge is self-close: a spring pulls the door shut over the last few degrees but does not cushion the closing motion. Soft-close uses a damper to slow the door so it settles quietly. If a damped close is required, confirm whether a compatible soft-close adapter exists for this Sugatsune series before specifying.
Yes. The hinge works on both cabinet types when paired with the correct base plate for each. The plate selection changes with the cabinet construction; the hinge body itself is the same.
When thick doors need a clean inset fit and a reliable close, this Satin Chrome hinge delivers the geometry and the finish to match the work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SL100-04A-W-32 Mfr# 100-04A-W-32 | 1.5mm 2D Adjustable Steel Wing Base Plate For H160 Series Hinges, Screw-On, Satin Chrome |