Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune J95 Series hinge is a free-swinging, screw-on concealed hinge built for inset doors on face-frame and frameless cabinets, finished in Black Nickel for installations where the hardware tone matters as much as the fit.
An inset door sits inside the cabinet opening rather than over it, framed by a small even reveal on all sides. That flush look depends on precise geometry, and the J95's full crank arm delivers it: the door clears the opening on the swing and sits square in the frame when closed. The 93-degree opening gives enough swing for practical access while keeping the door out of adjacent cabinet doors and walls in tighter layouts.
The free-swinging action makes this hinge the right pairing for push-to-open systems and handle-less fronts where a spring close would work against the release mechanism. It also suits display cases, furniture, and built-ins where the door should stay wherever it is positioned. A door hung on free-swinging hinges will not stay latched on its own, so plan for a magnetic catch or other retention when needed.
The 40mm cup and 48mm boring pattern are specific to the J95 Series. This is not a standard 35mm cup hinge, so existing 35mm bore holes will not accept this cup. For replacement or retrofit work, confirm the door's existing bore before ordering. A matching base plate is required and sold separately; use Sugatsune plates matched to this series.
The hinge body is steel, and the Black Nickel finish gives it a tone that sits between the cool gray of standard nickel and the full depth of matte black. On inset cabinetry, where the hinge cup is visible when the door is open, the finish is part of the visual. Black Nickel works well alongside dark hardware pulls and knobs without the high contrast of a bright nickel against a painted or dark-stained cabinet.
The screw-on mounting holds firm under repeated daily use on heavy solid-wood doors. At 55 lb rated per pair, this hinge handles the weight demands common in furniture-grade and semi-custom cabinet work without requiring a third hinge on most standard-height doors.
Cabinet shops building face-frame furniture pieces, inset kitchen runs, or built-in cabinetry where finish coordination is part of the specification will find Black Nickel the right call when a project's hardware palette runs dark. Designers specifying inset fronts with darker pulls can call this hinge out directly. Contractors fitting semi-custom or custom inset boxes benefit from the screw-on reliability on both face-frame and frameless carcasses.
Doors up to 1-3/16 inches thick fit this hinge, which covers solid lumber doors and thicker MDF panels that a standard hinge cannot seat properly. For doors within the standard 16 to 22mm range, the J95's deeper 15mm cup depth and 40mm bore are over-engineered for thin stock, so size the hinge to the actual door.
Yes. The J95 hinge mounts to a base plate on the cabinet, sold separately. Use Sugatsune plates matched to this series. Plates from other brands will not connect to the J95 arm.
A free-swinging hinge has no spring and no damper, so the door stays wherever it is placed. It will not pull itself shut or slow its own close. If you need the door to close on its own, this hinge is not the right choice. For inset doors on push-to-open systems or display cabinets, free-swinging is the correct motion type.
No. The J95 uses a 40mm cup diameter with a 48mm boring pattern. A 35mm hole will not accept this cup. For retrofits, confirm the existing bore before ordering.
Hinge count depends on door height, width, and weight. As a general starting point, doors up to about 40 inches tall typically use two hinges, taller doors three or more. Check the Sugatsune load table for the exact count against your door dimensions and weight.
Specify the J95 in Black Nickel when the project calls for flush inset doors on face-frame or frameless cabinets, the hardware palette runs dark, and the door needs to stay exactly where it is placed.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SLJ95-P6T-BN Mfr# J95-P6T-BN | Sugatsune J95 Hinge Mounting Plate Black Nickel, - J95-P6T-BN |
