Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune J95-C24/25T-BN is a concealed self-close hinge finished in Black Nickel, built for 1-inch overlay doors on both face-frame and frameless cabinets. Its 40mm cup and heavy-duty construction make it the right call where a standard 35mm hinge falls short and finish continuity with other Black Nickel hardware matters.
This hinge is built around two conditions that a commodity concealed hinge does not cover well: doors thicker than standard and installs where dark hardware is specified throughout. The 40mm cup bores into doors up to 1-3/16 inches thick, which puts it well past the 22mm upper limit of a standard 35mm-cup hinge. Pair that with a 48mm boring pattern rather than the common 45mm, and the J95 is a distinct physical fit from most replacement stock.
The 1-inch overlay straight arm sets the door over the cabinet side or face-frame stile at a full inch of coverage. On face-frame cabinets, the hinge screws directly to the stile. On frameless boxes, it mounts to the cabinet side panel. Either way, a matching base plate is required and sold separately. Use plates from the Sugatsune J95 series; plates from other brands will not connect to this hinge.
The 93-degree opening angle is the correct geometry for this hinge's thick-door application. The door needs that arc to clear the cabinet front cleanly without binding, and the 7-degree reduction from a standard 100-degree hinge is exactly what the thick-door clearance requires.
Black Nickel is not a painted surface. It is a plated steel finish that reads as a warm, dark tone with subtle metallic depth, distinct from matte black and from straight nickel. On a kitchen or bath where pulls, knobs, and other hardware are already specified in Black Nickel, swapping in a standard nickel or stainless hinge breaks the palette at the hinge cup, which is visible on face-frame doors when open. This hinge keeps that detail consistent. The steel construction carries the finish through daily use without the concerns a lighter-gauge body would introduce on a 55 lb load-rated pair.
Cabinet shops finishing a dark-hardware project where the client wants every visible piece to match will find the Black Nickel finish closes the loop on an otherwise nickel or stainless spec. Designers specifying a cohesive hardware story across a kitchen will appreciate that the hinge cup reads the same finish family as the pulls. Contractors replacing worn hinges on heavier solid-wood doors will find the 40mm cup and 1-3/16-inch door thickness capacity a more honest fit than trying to adapt a standard hinge to an oversized bore. This hinge is for indoor cabinet applications.
No. The hinge body mounts to a base plate that is sold separately. Use a matching plate from the Sugatsune J95 series. Plates from other brands are not compatible with this hinge's arm engagement.
The larger cup seats correctly in thicker door stock. Standard 35mm hinges are engineered for doors in the 16 to 22mm range. This hinge handles doors up to 1-3/16 inches thick, which needs the deeper 40mm cup geometry to seat and function properly.
On a thick-door application, 93 degrees is the right engineering for the job. The reduced swing lets a heavier, thicker door clear the cabinet front cleanly. For a standard-thickness door where full swing matters more than thick-door clearance, a standard-cup hinge at 110 degrees would be the better fit.
Black Nickel is a plated metallic finish with a warm dark tone and visible metallic character. Matte black is a non-metallic, flat dark surface. The two are visually distinct, particularly in natural or warm light, so confirm your hardware finish family before ordering.
Hinge count depends on the door's height, weight, and width. As a general guide, doors up to about 40 inches tall take two hinges, and taller or heavier doors need three or more. Consult the manufacturer load table for the exact count on your specific door.
Specify the J95-C24/25T-BN when the door is thick, the load is real, and the hardware palette calls for Black Nickel from cup to pull.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SLJ95-P6T-BN Mfr# J95-P6T-BN | Sugatsune J95 Hinge Mounting Plate Black Nickel, - J95-P6T-BN |
