Single Action Spring Hinge Self-Closing 8 Holes, 6 Knuckles 3-1/8"W Alumite

Single Action Spring Hinge Self-Closing For Doors

Single Action Spring Hinge Self-Closing design uses a spring-loaded mechanism to pull the door shut, which supports positive closing on cabinets or light doors without separate door closers. The hinge provides self closing with adjustable closing speed, so installers can tune how fast the door returns to its closed position to suit the application. The product is classified as a Single Action Spring Hinge, meaning it operates in one direction, which is useful where a defined swing direction is required. The hinge has 6 knuckles, creating a continuous bearing surface that supports smoother pivoting and consistent motion over repeated cycles. Resistance to bending is built into the hinge structure, which helps the leaves stay true under load so alignment is maintained at the door and frame. The finish is Alumite, giving the hinge a uniform metal appearance that coordinates with aluminum-toned hardware on cabinetry or other millwork.

Key Spring Hinge Details That Save Time

• The hinge width of 3-1/8 inches establishes the leaf coverage on door and frame, helping installers plan margin and reveal when laying out hinge locations.
• Single Action Spring Hinge classification defines that the leaf movement is one-way, which simplifies planning for swing direction on doors in controlled traffic paths.
• Spring loaded for self-closing operation reduces reliance on additional closing devices, which can simplify hardware schedules on smaller openings.
• Self closing with adjustable closing speed gives the flexibility to match door motion to the weight and use of the door, helping reduce slamming in day-to-day operation.
• Resistance to bending supports the hinge against deformation, which helps maintain door alignment and reduces the likelihood of rubbing at the jamb over time.
• The Alumite finish creates a consistent metallic look, allowing the hinge to coordinate visually with aluminum or similar finished components in a project.

Wall Mounted Spring Door Hinge Installation Focus

The hinge can be wall mounted, so one leaf fastens directly to a wall or jamb surface while the other leaf fastens to the door, which is useful when framing or structures are already in place. Mounting requires eight #8 flathead countersunk screws that are 3/4 inch or longer, so the fastening pattern is distributed across the leaf to spread load and support the spring action. Using flathead countersunk screws allows the screw heads to sit flush in the hinge holes, which helps the leaves close tight together without interference during operation. The 3-1/8 inch hinge width gives installers a clear reference when laying out screw lines and edge distances on both door and wall. Combined, these mounting details provide a predictable installation pattern that supports repeatable results across multiple openings.

Using The Sugatsune JSA-180A Spring Door Hinge

Where This Single Action Spring Hinge Fits Best

The hinge is categorized under Hinges and specifically Specialty Hinges, placing it in applications where a standard butt hinge does not provide the desired self-closing function. As a Single Action Spring Hinge, it suits doors that swing in one direction, such as service access doors or cabinets that require a consistent closing action. The manufacturer is Sugatsune America, so it aligns with projects already using Sugatsune hardware where consistent brand selection is preferred. The hinge width of 3-1/8 inches gives it a footprint appropriate for many light to medium door sizes, helping it bridge between compact cabinet hardware and larger architectural hinges. With six knuckles, the hinge offers a more continuous barrel, which pairs well with doors that see repeated cycles through the day because the load is shared across more pivot points.

Why JSA-180A Details Support Repeatable Door Closing

The JSA-180A spring door hinge is spring loaded for self-closing, which means the door is actively returned to the frame after opening and helps the door reach full closure without relying on user attention. Its self closing with adjustable closing speed feature lets installers set the spring tension to control motion, supporting smoother action on lighter doors or firmer closing on slightly heavier ones. Resistance to bending contributes to long-term alignment, so the hinge leaves resist distortion and help prevent the door edge from drifting out of plane with the jamb. The six knuckles distribute rotation across multiple bearing points, which supports consistent movement and can reduce localized wear on any single joint. The Alumite finish adds a stable surface treatment, so the hinge presents a finished appearance that blends with aluminum-colored hardware across a project. Together, these characteristics give installers clear parameters for selecting and setting up the hinge to deliver predictable door behavior.

Common Questions About The JSA-180A Spring Hinge

Selecting This Self-Closing Hinge For Your Project

This Single Action Spring Hinge Self-Closing model from Sugatsune America combines spring loaded self-closing, adjustable closing speed, and resistance to bending in a 3-1/8 inch wide, wall mounted format. When a one-way swinging door or cabinet needs dependable self-closing without separate closers, these details give a defined solution to plan around. Order the JSA-180A through Wurth Baer Supply to match projects that call for a Specialty Hinge with a spring return action and Alumite finish.