Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune inset pivot hinge gives small cabinetry doors a semi-concealed pivot point, helping create a clean look while still providing practical movement for light-duty doors. This PH-60 hinge is designed as an inset pivot door hinge, so the door edge sits inside the cabinet frame while rotating around a fixed pivot. The satin nickel finish ties the hinge into other nickel hardware on the job, keeping hardware details visually consistent across a run of cabinets. As a semi-concealed hinge, PH-60 leaves only limited hinge components visible, which helps maintain neat face lines on small cabinetry projects. Sugatsune America branding identifies this as a specialty hinge solution from a cabinetry-focused hardware manufacturer, giving installers a defined choice when a compact inset pivot is required.
The PH-60 inset pivot door hinge is identified as a screw-on satin nickel model, so it fastens directly to the cabinet and door with standard screw attachment points for straightforward mounting. This screw-on style supports typical shop and site workflows, allowing installers to place the hinge using familiar tools and patterns. With six holes specified for the hinge, PH-60 distributes its attachment across multiple points, which helps the hinge sit securely on small doors without relying on a single fastener line. The 2-3/8 inch length noted in the description gives the hinge a compact footprint, sized appropriately for small cabinetry applications rather than full-height doors. As a semi-concealed inset pivot hinge, PH-60 supports projects where a discrete pivot and an inset door layout are both required.
The PH-60 inset pivot door hinge is intended for small cabinetry applications, placing it in work such as compact cabinets, small casework, or similar light-duty enclosures where a full-size hinge would dominate the door. As a semi-concealed hinge, it suits installations where only minimal hardware should remain visible, helping cabinet faces stay visually simple while still providing a defined pivot point. The satin nickel finish lets the hinge sit alongside nickel pulls, knobs, or other trim in the same cabinet run, keeping hardware finishes aligned in kitchens, shops, or furniture pieces using nickel tones. Because PH-60 is sold as a set left and right, it fits layouts where one hinge is needed for each side of an opening, such as paired cabinet doors or mirrored small cabinets.
The PH-60 hinge is built as an inset pivot door hinge, so once the pivot location is established, doors repeat the same swing path, useful when producing multiple identical small cabinetry units. Its 2-3/8 inch length provides a compact, predictable envelope, which simplifies laying out hinge positions on doors and cabinet frames without encroaching heavily on interior space. The screw-on satin nickel design uses six holes, distributing fastening over several points, which helps maintain alignment over time on light doors by reducing stress at any single screw location. Being a semi-concealed hinge, PH-60 leaves only part of the mechanism visible, which also means fewer visible reference lines to manage during installation while still allowing access to the working pivot. Sugatsune America branding and the specific PH-60 part number let shops document this hinge choice clearly, supporting repeat orders and consistent hardware selection across multiple projects or job phases.
The Sugatsune PH-60 is an inset pivot door hinge in the semi-concealed hinge class, giving small cabinet doors a compact pivot while leaving only limited hinge components visible.
The PH-60 hinge is a screw-on satin nickel model, using screw attachment through six holes to secure the hinge to the cabinet and door in typical small cabinetry work.
The PH-60 inset pivot hinge is intended for small cabinetry applications, fitting compact cabinets and light-duty doors where a discrete pivot is preferred.
For the PH-60, semi-concealed means part of the hinge is hidden within the cabinet structure, leaving only limited hardware visible while the pivot function is maintained.
The satin nickel finish on the PH-60 hinge coordinates with other nickel cabinet hardware, keeping pulls, knobs, and hinges visually consistent across small cabinetry installations.
The PH-60 hinge is sold as a set left and right so each side of a cabinet opening has the correct handing, simplifying layout for pairs of small inset doors.
The Sugatsune inset pivot hinge PH-60 ties together inset door function, semi-concealed hardware, and a satin nickel finish, giving small cabinetry projects a compact pivot solution with consistent appearance. Its 2-3/8 inch length, screw-on mounting, and six-hole fastening pattern support straightforward installation on light cabinet doors. For cabinetmakers and installers planning small cabinetry runs, the defined PH-60 part number from Sugatsune America provides a repeatable hinge choice whenever an inset pivot layout in satin nickel is desired.