Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune XL-GC07-C is a screw-on glass cabinet door hinge designed for 3/8-inch overlay glass doors up to 47-1/4 inches tall. It opens to 90 degrees, swings freely without a spring or damper, and includes an integrated catch to hold the door closed.
This hinge is built for glass cabinet doors that overlay the opening and close with a catch rather than a spring or damper. The 90-degree opening arc gives solid everyday access to display cabinet and glass-front upper contents. Because the hinge is free-swinging, the door holds at any position between closed and fully open. The integrated catch handles the job of keeping the door shut, so there is no need to add a separate strike or magnet to the cabinet.
The hinge is sized for glass panels 5/16 inch thick. Door height up to 47-1/4 inches and width up to 19-11/16 inches fall within the rated range. Panels outside those dimensions need a different model.
The zinc body carries a Chrome finish that reads clearly on a glass door because the hardware is visible. Chrome coordinates with polished pulls, knobs, and other bright accents in a display or kitchen setting. Zinc construction gives the hinge solid weight and a consistent surface for the plated finish.
Because the hinge mounts to the glass, the glass must be tempered. Bore-through and clamp-style installations both concentrate load at the mounting point, and tempered glass handles that stress where annealed glass cannot. Confirm with your glass supplier that the panel is tempered before installation.
Cabinet shops and designers specifying glass-front display cabinets, upper kitchen cabinets with glass inserts, or bar and entertainment units will find the XL-GC07-C straightforward to detail. The screw-on attachment and built-in catch reduce the hardware count per door: one hinge handles mounting and latching in a single component. Homeowners replacing an existing glass hinge or adding glass doors to an existing cabinet can match the 3/8-inch overlay and 5/16-inch glass thickness to their current setup.
This is an indoor hinge. The Chrome finish on zinc is suited to dry, climate-controlled environments typical of residential and light commercial cabinetry.
No. The XL-GC07-C screws directly to the cabinet, so no separate base plate is needed.
Yes. Glass door hinges that mount to the glass panel require tempered glass. Confirm the panel is tempered with your glass supplier before installation.
Yes. The built-in catch holds the door closed, so no separate magnetic catch or strike is needed.
Neither. This is a free-swinging hinge. The door stays where you leave it and is held closed by the integrated catch, not a spring or damper.
The number depends on door height, width, and weight. As general guidance, doors up to about 40 inches typically use two hinges, and taller doors use three or more. Consult Sugatsune's load table for your specific door to confirm the count.
The Sugatsune XL-GC07-C brings overlay glass doors together in one component: a free-swinging hinge and a built-in catch, in a Chrome finish ready for visible display and kitchen cabinetry.