Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the dowel-mount front panel railing clip for Grass Nova Pro Scala rectangular railing, securing the railing's front end to the drawer front via a 3/8 inch (10mm) press-in dowel. It is a system-specific accessory and belongs exclusively to the Nova Pro Scala drawer system.
The front panel railing clip is the connection point between the Nova Pro Scala rectangular gallery railing and the drawer front panel. In a standard railing installation, the railing runs along the top of the drawer side from front to back. This clip anchors the forward end of that railing directly to the drawer front. Without it, the front of the railing floats, and the gallery rail cannot maintain its position or carry contents reliably. It is used wherever the Nova Pro Scala railing program calls for a front-panel anchor — typically on taller pot drawers, pantry pull-outs, or any Nova Pro Scala application where a gallery rail is part of the design.
The clip seats into a 3/8 inch (10mm) dowel hole bored into the back face of the drawer front. This approach eliminates exposed fasteners on the front face, which is especially important on painted or high-gloss fronts where a screw hole or plug would be visible. Bore the dowel hole to the depth and position specified in the Nova Pro Scala installation documentation before pressing the clip in place. The railing then engages the clip and locks into alignment. Rear mounting brackets for the railing are separate Nova Pro Scala components and must also be in place to complete the assembly.
Cabinet shops running Nova Pro Scala drawer systems with rectangular railing will need this clip any time the design calls for a front-panel gallery rail connection. It is equally relevant for a kitchen renovation specifying handle-less fronts — where a visible screw would compromise the look — and for production shops building multiple identical Nova Pro Scala drawer assemblies. Designers specifying Nova Pro Scala for high-end residential projects will want to confirm the front panel clip variant matches the mounting method already planned for the drawer front: dowel here, versus the screw-mount version available as a separate SKU in this family.
No. This clip is engineered for the Nova Pro Scala rectangular railing program. Grass system components are not interchangeable across platforms — Dynapro and Vionaro use their own railing and front-connection hardware.
The clip mounts into a 3/8 inch (10mm) dowel hole. Bore it to the position and depth called out in the Nova Pro Scala installation guide for your railing configuration.
No. This is the front panel clip only. The Nova Pro Scala rectangular railing and any rear mounting brackets are separate components and must be ordered to complete the railing assembly.
This clip uses a pressed-in 10mm dowel for attachment, hiding the fastener behind the drawer front. The screw-mount version uses a visible or countersunk screw instead. Choose based on your front panel material and whether a clean, hardware-free face is required.
Specifying the correct front panel railing clip from the start keeps the Nova Pro Scala railing assembly square, stable, and flush — with no exposed hardware on the drawer front face.
Sold In: 1 Each
